Mail Index

Thread Index

Re: Cheap AC Milliammeter
- From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Fuse(d) Note
- From: Ross <ross-o-at-mindspring-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Newbie
- From: Erthwin-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Fuse(d) Note
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Tungsten electrode resistance (was Coil Meeting...)
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
NST current metering surprises
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: 1920's Tesla Coil, Fischer Type H, 12 AMP !!
- From: "Mike 'Viggy'" <vigorita-at-colorado.edu> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST current metering surprises
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: electronic neon transformers
- From: NickandSim-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
MMC Design UK Bulk Order
- From: Alan Sharp <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Gap turn off at zero current and TVI
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Spark Gap
- From: "GEORGE STEIN" <afa2fg-at-email.msn-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Fuse(d) Note
- From: "Reinhard Walter Buchner" <rw.buchner-at-verbund-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: secondary coils
- From: "Reinhard Walter Buchner" <rw.buchner-at-verbund-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Tungsten Facts (was: Re: Coil Meeting...)
- From: "Reinhard Walter Buchner" <rw.buchner-at-verbund-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Coil Meeting...
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Fuse(d) Note
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Ignition coil driver (555 type)
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: 120kV capacitors available
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: 99 bottles of beer in the cap.....
- From: Terry Fritz <twftesla-at-uswest-dot-net>
MMC Capacitor Power Calculations
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: 99 bottles of beer in the cap.....
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Tungsten Facts (was: Re: Coil Meeting...)
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Caps in series
- From: Erthwin-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
good capacitors?
- From: LUGNUT00-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Rebuilding NST
- From: "Adam" <aspid-at-netzero-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Gap turn off at zero current and TVI
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: electronic neon transformers
- From: "Choad" <choad69-at-geocities-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Gap turn off at zero current and TVI
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla's experiment - lighting wires!
- From: Jeff Behary <jeff_behary-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
My problems...*lol*
- From: Erthwin-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: electronic neon transformers
- From: Neon John <johngd-at-bellsouth-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Watt Meter
- From: Scott_L_Hanson-at-notes.seagate-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Diathermy Techniques: Zapping tissues with Tesla Coils
- From: Jeff Behary <jeff_behary-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST current metering surprises
- From: "Reinhard Walter Buchner" <rw.buchner-at-verbund-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Sorry Bob, about the Ccox equation
- From: "Gavin Dingley" <gavin.dingley-at-astra.ukf-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Cardboard secondary
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Fieldplotter 2.0
- From: "Rainer Schwemmer" <rainman-at-asamnet.de> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Polyurethaning the Seconday Problems
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Ball Discharge
- From: "harvey norris" <harvich-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Rotary gaps
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Air Blast vs RSG
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Polyurethaning the Seconday Problems
- From: "Robert Jones" <alwynj48-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
MMC Problems!
- From: "Arthur Mavros" <mpiece-at-one-dot-net.au> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: question
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
From primary to top terminal
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Polyurethaning the Seconday Problems
- From: "Bill Parn" <parn-at-starpower-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Formula for true self capacity of a coil.
- From: "Gavin Dingley" <gavin.dingley-at-astra.ukf-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Polyurethaning the Seconday Problems
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
duh
- From: "Christopher Boden" <chrisboden-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
SRSG Newbie questions
- From: "Bob Berg" <berg_bob-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Polyurethaning the Seconday Problems
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
new cap idea- more info
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Terry's NST Filter Network
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Sorry Bob, about the Ccox equation
- From: "Robert Jones" <alwynj48-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Terry's NST Filter Network
- From: Terry Fritz <twftesla-at-uswest-dot-net>
SRSG Newbie questions
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Gavin Dingley" <gavin.dingley-at-astra.ukf-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Steve" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Cardboard secondary
- From: "Steve" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
economical rotory gap motor
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
new cap idea
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Polyurethaning the Seconday Problems
- From: "Paul Mathus" <pmathus-at-learningco-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: duh
- From: "Dale Hall" <Dale.Hall-at-trw-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: MMC Problems!
- From: "Calvin Patrick" <linhack_tux-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Polyurethaning the Seconday Problems
- From: "Steve Bell" <steve-at-breakfix.demon.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: SRSG Newbie questions
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: UK TESLATHON pic's and new record
- From: "Calvin Patrick" <linhack_tux-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Formula for true self capacity of a coil.
- From: "Ed Phillips" <evp-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: SRSG Newbie questions
- From: Toxandale-at-SPP-dot-org (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: MMC Problems!
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Calvin Patrick" <linhack_tux-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Secondary form treatment
- From: "J. B. Weazle McCreath" <weazle-at-hurontel.on.ca> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: MOT's
- From: "Kevin D" <teslacoilfreak1-at-mediaone-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
pole pig question
- From: "D.Wightman" <dwightman-at-mmcable-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: some ?'s about a odd TC setup
- From: "Kevin D" <teslacoilfreak1-at-mediaone-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Southern California Teslathon (was: UK TESLATHON pic's and new record)
- From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Formula for true self capacity of a coil.
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: From primary to top terminal
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Bill Parn" <parn-at-starpower-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: pole pig question
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Superiority of the magnifier
- From: "Adam Parker" <park_e_r-at-hiwaay-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Terry's NST Filter Network
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: SRSG Newbie questions
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Superiority of the magnifier
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Superiority of the magnifier
- From: "Gavin Dingley" <gavin.dingley-at-astra.ukf-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Superiority of the magnifier
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Superiority of the magnifier
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Bill Parn" <parn-at-starpower-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
tapped primary
- From: "Jeremiah" <jmeizis-at-metallicafan-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
NST testing
- From: "Jeremiah" <jmeizis-at-metallicafan-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: pole pig question
- From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: pole pig question
- From: "David Dean" <deano-at-corridor-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
AC/DC/Calssic/Mag Coil
- From: "Christopher Boden" <chrisboden-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re:USA teslathons
- From: "Christopher Boden" <chrisboden-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Superiority of the magnifier
- From: "David Trimmell" <davidt-at-pond-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Jason R. Johnson" <hvjjohnson13-at-xoommail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Gary Weaver's Email Address
- From: "Yurtle Turtle" <yurtle_t-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: AC/DC/Calssic/Mag Coil
- From: "rwall" <rwall-at-ix-dot-netcom-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
SRSG Questions
- From: "Yurtle Turtle" <yurtle_t-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Ed Phillips" <evp-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: SRSG Newbie questions
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Dave Sharpe Watt Meters
- From: "rwall" <rwall-at-ix-dot-netcom-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: SRSG Newbie questions
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: tapped primary
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: SRSG Questions
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: SRSG Questions
- From: "Bert Hickman" <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: SRSG Questions
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: tapped primary
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Drill-press for milling?
- From: "Dan and Nancy" <ntesla-at-logicsouth-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
SRSG
- From: "Steve" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: "Steve Bell" <steve-at-breakfix.demon.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: "Phillip Heslin" <pheslin-at-home-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: JHCTES Ver 3.1 Program
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST testing
- From: "Christopher Boden" <chrisboden-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: "Kevin R Eldredge" <kreld-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Super fast E-Tesla5 in "C"
- From: Terry Fritz <twftesla-at-uswest-dot-net>
"Ion Generator" Tesla?
- From: "Brad Davidson (Kiloman)" <davidson-at-cyber-dyne-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Dielectric Constant?
- From: "Arthur Mavros" <mpiece-at-one-dot-net.au> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST testing
- From: "Powdermnky007" <Powdermnky007-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: tapped primary
- From: Clearspring1-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: JHCTES Ver 3.1 Program
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: "Ion Generator" Tesla?
- From: "Mike Harrison" <mike-at-whitewing.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
First Light & Carbon?
- From: "Trent Mullins" <neontrent-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?
- From: "Steve" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST testing
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Dielectric Constant?
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: First Light & Carbon?
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: First Light & Carbon?
- From: "Luc" <ludev-at-videotron.ca> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?/Gasoline Arc
- From: "harvey norris" <harvich-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?/Gasoline Arc
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Oklahoma Biggg Coil update
- From: "Kevin R Eldredge" <kreld-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Super fast E-Tesla5 in "C"
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Dielectric Constant?/Gasoline Arc
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?
- From: "Herwig Roscher" <herwig.roscher-at-gmx.de> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Just recompiled E-tesla with QB7.1 32 bit compiler.
- From: "The Flavored Coffee Guy" <elgersmad-at-msn-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Grid dip meter
- From: "Colin Dancer" <CMD-at-datcon.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Bottle caps
- From: "Jeremiah" <jmeizis-at-metallicafan-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
FILT1.JPG (Was Terry's NST Filter Network)
- From: "Daniele Bortoluzzi" <dbortoluzzi-at-sogeda.it> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
CFM and RQ Gaps
- From: "Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Tesla simulation software project
- From: "Paul" <paul-at-abelian.demon.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?/Gasoline Arc
- From: "harvey norris" <harvich-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dielectric Constant?/Gasoline Arc
- From: "harvey norris" <harvich-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Grid dip meter
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: CFM and RQ Gaps
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
wiring the thing....
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Secondary Coating Probs Fixed!
- From: "Bob Berg" <berg_bob-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Bottle caps
- From: "Alex Crow" <alexcrow-at-clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: CFM and RQ Gaps
- From: "Paul Mathus" <pmathus-at-learningco-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Super fast E-Tesla5 in "C"
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "boris petkovic" <petkovic7-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: FILT1.JPG (Was Terry's NST Filter Network)
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: FILT1.JPG (Was Terry's NST Filter Network)
- From: "Paul Mathus" <pmathus-at-learningco-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: JHCTES Ver 3.1 Program
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Grid dip meter
- From: "Steve" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: First Light & Carbon?
- From: "Calvin Patrick" <linhack_tux-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
WOW! I'm thrilled!
- From: AlbieDavis-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: CFM and RQ Gaps
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: wiring the thing....
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: FILT1.JPG (Was Terry's NST Filter Network)
- From: "Daniele Bortoluzzi" <dbortoluzzi-at-sogeda.it> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: wiring the thing....
- From: "Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: wiring the thing....
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Tesla Letter and Photo
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Tesla simulation software project
- From: "Paul" <paul-at-abelian.demon.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: CFM and RQ Gaps
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST testing
- From: "Rick Richard" <ollopa-at-jps-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "Calvin Patrick" <linhack_tux-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: wiring the thing....
- From: "bob golding" <yubba-at-clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Big top loads
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Terry's NST Filter Network
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Super fast E-Tesla5 in "C"
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Tesla Letter and Photo
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: FILT1.JPG (Was Terry's NST Filter Network)
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: FILT1.JPG (Was Terry's NST Filter Network)
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: JHCTES Ver 3.1 Program
- From: "Richard Kircher" <richard.kircher-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: CFM and RQ Gaps
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Dave Sharpe Watt Meters
- From: "David Sharpe" <sccr4us-at-erols-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Christopher Boden" <chrisboden-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: CFM and RQ Gaps
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Brass carriage bolts for sale
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: JHCTES Ver 3.1 Program
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
NSTs, Microwaves, Marx Generators and extorsion in the UK!
- From: "Info Host-1" <Info-at-host-1.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Grayson B Dietrich" <electrofire-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
My solid-state primary apparatus
- From: "Kennan C Herrick" <kcha1-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "boris petkovic" <petkovic7-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
MMC caps in the works
- From: "Tomahawk.....:)" <ignatz-at-datasync-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "boris petkovic" <petkovic7-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
vac tube TC secondary design question
- From: "Simon Winder" <swinder-at-microsoft-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Grid dip meter
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: JHCTES Ver 3.1 Program
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: My solid-state primary apparatus
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: wiring the thing....
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: duh
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: My solid-state primary apparatus
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
dc rotary motor
- From: "bob golding" <yubba-at-clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "Calvin Patrick" <linhack_tux-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: My solid-state primary apparatus
- From: "Kennan C Herrick" <kcha1-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
What power am I using?
- From: Toxandale-at-SPP-dot-org (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Kurt Schraner" <k.schraner-at-datacomm.ch> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Access to UNIX cluster-anybody want some processing time?(was :Re: Tesla simulation software project)
- From: "Bryan Steinbach" <warp27-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: CFM and RQ Gaps
- From: "S.Gaeta" <SGTPORKY-at-prodigy-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: JHCTES Ver 3.1 Program
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Access to UNIX cluster-anybody want some processing time?(was :Re: Tesla simulation software project)
- From: Terry Fritz <twftesla-at-uswest-dot-net>
E-TESLA 5.50 final...
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: dc rotary motor
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: CFM and RQ Gaps
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Access to UNIX cluster-anybody want some processing time?
- From: paul-at-abelian.demon.co.uk (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: paul-at-abelian.demon.co.uk (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: CFM and RQ Gaps
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Access to UNIX cluster-anybody want some processing time?(was:Re: Tesla simulation software project)
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: dc rotary motor
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: dc rotary motor
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Why isn't it working
- From: "Jeremiah" <jmeizis-at-metallicafan-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: What power am I using?
- From: "Thomas McGahee" <tom_mcgahee-at-sigmais-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: dc rotary motor
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Grid dip meter
- From: "Ray von Postel" <vonpostel-at-prodigy-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Bill Parn" <parn-at-starpower-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: vac tube TC secondary design question
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Why isn't it working
- From: "Tomahawk.....:)" <ignatz-at-datasync-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
stepper
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
steppers
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
salt water caps
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Inductance Issue HELP!!!!
- From: "BunnyKiller" <bigfoo39-at-telocity-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: dc rotary motor
- From: "Dale Hall" <Dale.Hall-at-trw-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: dc rotary motor
- From: "BunnyKiller" <bigfoo39-at-telocity-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: dc rotary motor
- From: "Paul Mathus" <pmathus-at-learningco-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Grid dip meter
- From: "William R. Langston" <blangsto-at-iwvisp-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Ceramic core resistors
- From: "Daniele Bortoluzzi" <dbortoluzzi-at-sogeda.it> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: ignition coil for high voltage source
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Ceramic core resistors
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: ignition coil for high voltage source
- From: "Gregory R. Hunter" <ghunter-at-accucomm-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Robin Copini" <rcopini-at-merlin-dot-net.au> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
1256 variacs
- From: "D.Wightman" <dwightman-at-mmcable-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Paper about multiple resonance circuits
- From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Barton B. Anderson" <tesla123-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: dc rotary motor
- From: "bob golding" <yubba-at-clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: dc rotary motor
- From: "Barton B. Anderson" <tesla123-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Ed Phillips" <evp-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Ceramic core resistors
- From: "Calvin Patrick" <linhack_tux-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
(no subject)
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Grid dip meter
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Resonator Self Resonant Frequency
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Grid dip meter
- From: "Ed Phillips" <evp-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
async RSG question
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Why isn't it working
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: paul-at-abelian.demon.co.uk (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Grid dip meter
- From: "Colin Dancer" <CMD-at-datcon.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Inductance Issue HELP!!!!
- From: "Bert Hickman" <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Jason R. Johnson" <hvjjohnson13-at-xoommail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Ceramic core resistors
- From: "Andres Vogel" <dreman-at-techie-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
NST Secondaries
- From: "Michael Novak" <acmnovak-at-msn-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Maxwell Capacitor division...gone?
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: 1256 variacs + questions
- From: "Chris Brick" <cbrick-at-rebelbase-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Bill Parn" <parn-at-starpower-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: async RSG question
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: async RSG question
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Ceramic core resistors
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Maxwell Capacitor division...gone?
- From: "Jeffery Pederson" <kd4lyh-at-webtv-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Kennan C Herrick" <kcha1-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: vac tube TC secondary design question
- From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: ignition coil for high voltage source
- From: "Dale Hall" <Dale.Hall-at-trw-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: 1256 variacs + questions
- From: "Kevin R Eldredge" <kreld-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: async RSG question
- From: "BunnyKiller" <bigfoo39-at-telocity-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Big top loads
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Inductance Issue HELP!!!!
- From: "BunnyKiller" <bigfoo39-at-telocity-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Tesla simulation software project
- From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
HV DIODES WANTED
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Masonlite
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Can G10 sheet be laminated?
- From: ghub005-at-xtra.co.nz (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: structural materials
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: dc rotary motor
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: 1256 variacs + questions
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: async RSG question
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Paper about multiple resonance circuits
- From: "The Flavored Coffee Guy" <elgersmad-at-msn-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: HV DIODES WANTED
- From: "Trent Mullins" <neontrent-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Masonlite
- From: "Trent Mullins" <neontrent-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Inductance Issue HELP!!!!
- From: "Bert Hickman" <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: structural materials
- From: "Thomas McGahee" <tom_mcgahee-at-sigmais-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: HV DIODES WANTED
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Can G10 sheet be laminated?
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Masonlite
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
PVC Wire for a secondary?
- From: "David Mills" <dave-at-g7uvw.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Can G10 sheet be laminated?
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Colorado Springs Notes?
- From: "Trent Mullins" <neontrent-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Can't find this scr
- From: BillEaver-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Colorado Springs Notes?
- From: "Bert Hickman" <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Can G10 sheet be laminated?
- From: "BunnyKiller" <bigfoo39-at-telocity-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
for sale - breakdown voltage tester with a nice variac inside
- From: "Bill Noble" <william_b_noble-at-email.msn-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Resonator Self Resonant Frequency
- From: "harvey norris" <harvich-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: E-TESLA 5.50 final...
- From: Rscopper-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "Edward Wingate" <ewing7-at-rochester.rr-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "David Mills" <dave-at-g7uvw.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "Finn Hammer" <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "Gregory R. Hunter" <ghunter-at-accucomm-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: PVC Wire for a secondary?
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: E-TESLA 5.50 final...
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Voltage profile on the secondary
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: PVC Wire for a secondary?
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Voltage profile on the secondary
- From: "Robert Jones" <alwynj48-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Florida Mini-Teslathon
- From: "D&M's High Voltage" <dmshv.davmckin-at-gte-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "D&M's High Voltage" <dmshv.davmckin-at-gte-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: HV DIODES WANTED
- From: "Herwig Roscher" <herwig.roscher-at-gmx.de> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
first light
- From: "vi01hlv00" <hilary.morris-at-virginnet.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
copper plating
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: first light
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Drill-press for milling?
- From: "Kristian Ukkonen" <kukkonen-at-cc.hut.fi> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: HV DIODES WANTED
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Paper about multiple resonance circuits
- From: "Mark Fergerson" <mfergerson1-at-home-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Florida Mini-Teslathon
- From: "Robert Jones" <alwynj48-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "D.Wightman" <dwightman-at-mmcable-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: copper plating
- From: "Lau, Gary" <Gary.Lau-at-compaq-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
E-Tesla = Medhurst
- From: "Robert Jones" <alwynj48-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Resonator Self Resonant Frequency
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: copper plating
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
pictures of coil
- From: "D.Wightman" <dwightman-at-mmcable-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "Ed Phillips" <evp-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Florida Mini-Teslathon Picture Links
- From: "D&M's High Voltage" <dmshv.davmckin-at-gte-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Paper about multiple resonance circuits
- From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: pictures of coil
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
HV Items for Sale
- From: "Tedd Payne" <teddp-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: PVC Wire for a secondary?
- From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Medusa's back up!
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "Edward Wingate" <ewing7-at-rochester.rr-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: PVC Wire for a secondary?
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Luc" <ludev-at-videotron.ca> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: E-Tesla = Medhurst
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Space Wound Secondaries
- From: Megavolt121-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
UK Teslathon
- From: "Mike Harrison" <mike-at-whitewing.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
need some suggestions
- From: "Kevin D" <teslacoilfreak1-at-mediaone-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
NST Auction in VA & PA
- From: "Trent Mullins" <neontrent-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Space Wound Secondaries
- From: "Mike Harrison" <mike-at-whitewing.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Space Wound Secondaries
- From: "Steve Rosenthal" <sdrosen-at-cwia-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
moisture in secondary form? Whats the problem
- From: "Jeremiah" <jmeizis-at-metallicafan-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
first light setup
- From: "vi01hlv00" <hilary.morris-at-virginnet.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Space Wound Secondaries
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: need some suggestions
- From: "Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Alternative Toroid Idea
- From: "Alexander Rice" <alexjrice-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Medusa's back up!
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Space Wound Secondaries
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Steve" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "Jason R. Johnson" <hvjjohnson13-at-xoommail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: copper plating
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: E-Tesla = Medhurst
- From: "Robert Jones" <alwynj48-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: E-Tesla = Medhurst
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: copper plating
- From: ANTarchimedes-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: first light
- From: "Paul Mathus" <pmathus-at-learningco-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Medusa's back up!
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: E-Tesla = Medhurst
- From: "Barton B. Anderson" <tesla123-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: first light setup
- From: "Paul Mathus" <pmathus-at-learningco-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Space Wound Secondaries
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Medusa's back up!
- From: "Barton B. Anderson" <tesla123-at-pacbell-dot-net>
Re: E-Tesla = Medhurst
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Re: Space Wound Secondaries
- From: LISN2ME-at-electricnet-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
MOT Ballast for Pole Xfmr
- From: "Gregory R. Hunter" <ghunter-at-accucomm-dot-net>
Re: Resonator Self Resonant Frequency
- From: harvey norris <harvich-at-yahoo-dot-com>
MOT Ballast for Pole Xfmr
- From: "Gregory R. Hunter" <ghunter-at-accucomm-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST Auction in VA & PA
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Space Wound Secondaries
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Problems with Florida Mini-Teslathon Picture Links
- From: "D&M's High Voltage" <dmshv.davmckin-at-gte-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: need some suggestions
- From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: E-Tesla = Medhurst
- From: ghub005-at-xtra.co.nz (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: first light
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Alternative Toroid Idea
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: copper plating
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Medusa's back up!
- From: "Barton B. Anderson" <tesla123-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: MOT Ballast for Pole Xfmr
- From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Steve" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: PVC Wire for a secondary?
- From: "David Mills" <dave-at-g7uvw.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Grayson B Dietrich" <electrofire-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ignition coil for high voltage source
- From: "Grayson B Dietrich" <electrofire-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Primary Turns
- From: "Kamil Kompa" <czlonek-at-polbox-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Body capacitance.
- From: "Kamil Kompa" <czlonek-at-polbox-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: Parpp807-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: PVC Wire for a secondary?
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: first light
- From: "bob golding" <yubba-at-clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
De-potting a computer flyback transformer
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: copper plating
- From: "Ed Phillips" <evp-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Body capacitance.
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Body capacitance.
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST Auction in VA & PA
- From: "Trent Mullins" <neontrent-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Primary Turns
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Medusa's back up!
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST Auction in VA & PA
- From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Correction factor for HV probes?
- From: Scott_L_Hanson-at-notes.seagate-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Body capacitance.
- From: "John Williams" <jwilliams-at-edm-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: NST Auction in VA & PA
- From: "Trent Mullins" <neontrent-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
chokes
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: MOT Ballast for Pole Xfmr
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Primary Turns (adding to my post)
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Form materials, glue, and urethane
- From: "Chris Brick" <cbrick-at-rebelbase-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Coil Specs. was PVC Wire for a secondary?
- From: "D&M's High Voltage" <dmshv.davmckin-at-gte-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
A Tesla / Marx Coil (Really!)
- From: "Gregory R. Hunter" <ghunter-at-accucomm-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Tesla List status (fwd)
- From: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>
Tesla List status
- From: "Chip Atkinson" <chip-at-pupman-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
public screening of tesla coil documentary (fwd)
- From: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>
public screening of tesla coil documentary (fwd)
- From: "Chip Atkinson" <chip-at-pupman-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
capacitor wanted
- From: "Simon Winder" <swinder-at-microsoft-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Whoo-hoo! (and some questions)
- From: "Michael Novak" <acmnovak-at-msn-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Building big top loads
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
UK For sale - variacs
- From: "Alan Sharp" <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
new pics at high power
- From: "Robin Copini" <rcopini-at-merlin-dot-net.au> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
ground ring
- From: "Richard Barton" <richardbarton-at-caving5.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: public screening of tesla coil documentary (fwd)
- From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Tesla coil video # 25 is ready
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ground ring
- From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: new pics at high power
- From: C1wisdom-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
UV light hazard
- From: "Paul Mathus" <pmathus-at-learningco-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: ground ring
- From: Tesla729-at-cs-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
4th-of-july showings
- From: "sundog" <sundog-at-timeship-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
new pics of my vacuum tube coil
- From: "Simon Winder" <swinder-at-microsoft-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Capacitor
- From: "fred" <zfred-at-ozemail-dot-com.au> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Long Islander of the Century
- From: "S.Gaeta" <SGTPORKY-at-prodigy-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Need High voltage caps and diodes
- From: Fucian-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: UV light hazard and test
- From: "Robert Jones" <alwynj48-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re: Need High voltage caps and diodes
- From: Terry Fritz <twftesla-at-uswest-dot-net>
Source for capacitors
- From: "Steve Rosenthal" <sdrosen-at-cwia-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
How to get Glyptol
- From: "Peter Whitfill" <pete-at-whitfill-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
[Tesla list] Header mangling<ADMIN> (fwd)
- From: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>
Re: Source for capacitors
- From: "Steve Rosenthal" <sdrosen-at-cwia-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Can' find this SCR
- From: BillEaver-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
DC coil filtering
- From: "Oxandale, Terry" <Toxandale-at-SPP-dot-org> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
RE: Source for capacitors
- From: "Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
header mangling,etc.
- From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
wintesla
- From: "J. Kooiman" <jkooi-at-wish-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
beginners page
- From: "J. Kooiman" <jkooi-at-wish-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Re:How to get Glyptal
- From: "Rod & Patti" <asrai-at-cfl.rr-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)

Mail converted by MHonArc 2.4.6