Re: ignition coil for high voltage source

["Grayson B Dietrich" <electrofire-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

http://www.electrophile.8m-dot-com/wallignt.gif

This shows a very simple means of driving an ignition coil. It can and
has been used to power small TC's by other folks, so while I have no
personal experience with applying this circuit in that fashion, I belive
it can be done. You may need to add a rectifier to it-- a few MOT diodes
in series should work fine.

-Grayson Dietrich

On Wed, 31 May 2000 18:23:02 -0600 Tesla List <tesla-at-pupman-dot-com> writes:
> Original Poster: "Jeremiah" <jmeizis-at-metallicafan-dot-com> 
> 
> Is there any way you could use 1 or maybe 2 ignition coils in a 
> circuit as
> a power supply for a tesla coil.  If there is such a circuit or a 
> high
> voltage ignition coil circuit i would be grateful for the help.
> Jeremiah
> 
> 
> _____________________________________________
> Free email with personality! Over 200 domains!
> http://www.MyOwnEmail-dot-com
> 
> 

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno-dot-com/get/tagj.