[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SRSG Questions



That would certainly be Brent Turners rotary.

A classic.

http://www.apc-dot-net/bturner/photos.htm

Cheers, Finn Hammer

Tesla List wrote:
> 
> Original Poster: "Yurtle Turtle" <yurtle_t-at-yahoo-dot-com>
> 
> I'm getting up parts to build a SRSG. I'm planning on
> an 8" x 1/4" G10 disk with 4 1/8" rotating electrodes.
> Since I'm planning on two gaps, I need a copper (or
> brass) ring, connecting the rotating electrodes. For
> around 1 to 2 kVA, what width and thickness copper (or
> brass) would be adequate?
> 
> Also, I have collected a number of images I've found
> and liked. However, I can't always find who's page
> they came from. Does anyone on the list have images
> named "rotary_1.jpg" through "rotary_4.jpg"? Whosever
> it is has a sharp looking RSG.
> 
> thanks
> Adam
> 
> =====
> Adam Minchey
> yurtle_t-at-yahoo-dot-com
> www.geocities-dot-com/yurtle_t/index.htm
> 
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos -- now, 100 FREE prints!
> http://photos.yahoo-dot-com