Oklahoma Biggg Coil update

["Kevin R Eldredge" <kreld-at-juno-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Hi all

  The 15 kVA transformer for the Biggg coil was finished today.  I should
have pic's on my web page withen a week at flash-dot-net/~kreld/kevin's.htm. 
 The final tested output voltage is 23 kV.  It was tested in a Jacobbs
ladder and pulled around 150 amp at nearly full input power.

  The next phase will be the secondary coil to be started this week.  
Preliminary plans call for a 24" x 120" coil wound with #14 t.h.h.n.
p.v.c. wire.  Updates as progress continues.

Safe coiling

Kevin E.
________________________________________________________________