steppers

["Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

thank you sundog, and my apologies.
after reading your post i took a better look at the stepper driver and
motor i was thinking about.
the driver gave 1500 pps, i thought that's pretty good rpm to start
with, then i looked at the motor stats.. oops it had 7.5deg. per pulse.
soo not 1500 rpm at all, 38.25 rpm.
please excuse my ignorance on this one!
i feel a little silly for not looking a little harder before posting
this one.
regards (with head held low)....marc