Re: PVC Wire for a secondary?

["David Mills" <dave-at-g7uvw.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

> Cheers Ed,

I needed to replace my rather shabby and underperforming secondary, I though
best to check with the people who know.

Dave

>
>
> >Dave,
>
> >I have used PVC covered machine tool wire MTW/THHN/TFFN with outer >vinyl
> >jacket for several large coils including my Twin Coil and it works fine. It
> >is available in spools up to 2500 feet at almost any large commercial
> >electrical contractor supply place. The price varies with the current price
> >of copper, but is always very reasonable IMHO.
>
> >My Twin Coil can be seen at:
>
> >http://users.deltanet-dot-com/users/stcole/public_html/hv/wingate.html
>
> and
>
> >ftp://nic.funet.fi/pub/sci/electrical/tesla/pictures/wingate/wingate2.jpg
>
> Safe coiling,
>
> Ed Wingate RATCB