[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Polyurethaning the Seconday Problems

HI Bob,

Yes I have,

Leave a kettle boiling in the room,  or use a humidify

or get one of the those so called ion generators (not a Tesala coil but you
can use the power supply to build a tesla coil) or build one from your NST
(not recommended for beginners)

Regards Bob

-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Wednesday, May 31, 2000 10:46 PM
Subject: Polyurethaning the Seconday Problems

>Original Poster: "Bob Berg" <berg_bob-at-hotmail-dot-com>
>I'm in the process of building my first 6" secondary out of pvc.  I made a
>nice winding jig using a 1/2" drill / variace.  I can even use to spin the
>pipe while sanding.  Now that I have a nice clean & smooth secondary I
>to coat it with polyeurathane while rotating it slowly.  The problem I'm
>having is that the PVC/Poly is picking up a static charge and attracting
>kinds of dust and other air born junk.  I would like to make it a
>contaimination free as possible. Does anyone have any suggestions to keep
>the PVC free of static charge?  Maybee I can make a big Van De Graff with
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail-dot-com