Mail Thread Index

Main Index

(0) Re: Chris T's NST question..., Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Epoxy breakdown voltage, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Choke sources, Keith Garvin (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Tesla coil photo, L. Mark Pilant - MS ZK03-4/Y02 DTN 264-1529" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Ground current, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Homemade transformers, Mark E Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) How does one go about getting a pole pig, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Transformers, Wattage and some, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: RSG's different shape electrodes, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: BL Saga, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: New cap, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Trannies, how do I rewind them?, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Dry pole pigs, Jim Lux" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Magnifiers;RF X-former HV hold off, dwight duncan (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Trip, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary shielding, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Got two more, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Coil for rent?, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Keith Maddox (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) HBT and more info for Doug, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) TCBA News Index, Bob Wroblewski (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New cap, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Trannies, how do I rewind them?, David Dean" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Pigs for sale..., Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: How does one go about getting a pole, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) My NST question!, AuroraOne-at-webtv-dot-net (by way of Terry Fritz )
(0) Re: Pigs for sale..., Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) homemade ferrite torroid, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Self-built power transformer, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Transformers, Wattage and some, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: HBT and more info for Doug, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Choke sources, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Transformers, Wattage and some, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Got two more, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: How does one go about getting a pole, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Got two more, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Transformers, Wattage and some, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Variac for sale, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Epoxy breakdown voltage, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Choke sources, Christoph Baumann (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: homemade ferrite torroid, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Got two more, Teslaman-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Ground current, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Pulse Forming Networks, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifiers;RF X-former HV hold off, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: New cap, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) First coil I built worked great !, R.E.Burnett" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap Question, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) More HBT info for Doug, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: toroids, bob golding (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More HBT info for Doug, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) where to buy the big variacs??, Nteslamoot-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Epoxy breakdown voltage, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RSG's different shape electrodes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, Nathan Bonsal" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: First coil I built worked great !, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Shape of secondary coil..., chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: toroids, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: homemade ferrite torroid, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Cap Question, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Proposed capacitor design, Aric (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Shape of secondary coil..., Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Running higher than 400 BPS?, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Peak Charge?, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: toroids, bob golding (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Shape of secondary coil..., Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Shape of secondary coil..., Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) 1st time, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: RSG's different shape electrodes, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Power Applied?, and further wiring trick, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) My Pig, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: First coil I built worked great !, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Thanks a lot everybody!, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coil for rent?, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Pigs and other barnyard experiments., Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Peak Charge?, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: where to buy the big variacs??, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) What kinda tube?, Teslaman-at-aol-dot-com (by way of Terry Fritz )
(0) Re: RSG's different shape electrodes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Peak Charge?, wb8jkr-at-juno-dot-com (Mark S Graalman) (by way of Terry Fritz )
(0) Re: Shape of secondary coil..., Phillip D. Rembold" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Peak Charge?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ground current, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 1st time, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 1st time, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Ground current, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Salvage!, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: where to buy the big variacs??, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) power output??, bhelms-at-dialpoint-dot-net (Brian Helms) (by way of Terry Fritz )
(0) Important questions..., Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New HBT info for Doug, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Help for Sam (Was:Thanks a lot everybody, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: 1st time, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: where to buy the big variacs??, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: where to buy the big variacs??, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: What kinda tube?, Phillip D. Rembold" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) my third coil, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Salvage!, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RSG's different shape electrodes, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 1st time, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Peak Charge?, Gary Lau 04-Oct-1998 1219 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Salvage!, bob golding (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: What kinda tube?, Phillip D. Rembold" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: power output??, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Proposed capacitor design, Gary Lau 04-Oct-1998 1245 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Important questions..., D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My Pig, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) ME?!? Winding my own transformer???, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: New HBT info for Doug, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: New HBT info for Doug, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: where to buy the big variacs?? C & H, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Is high coil frequency a bad thing?, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My Pig (%imp), mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: power output??, bhelms-at-dialpoint-dot-net (Brian Helms) (by way of Terry Fritz )
(0) RE: Self-built power transformer, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Salvage!, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Pigs and other barnyard experiments., RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Cap Question, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) HV rectifier data anyone?, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RSG's different shape electrodes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Proposed capacitor design, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) WTB: Neon transformer, Charles Brush (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Floating pigs, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Another Tube find, Laser39646-at-aol-dot-com (by way of Terry Fritz )
(0) Crazy idea for a spark gap, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Salvage!, rwillis-at-metisrv0.man-env-dot-com (by way of Terry Fritz )
(0) BL in TC arcs, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Is high coil frequency a bad thing?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: New HBT info for Doug, A.C. Kuntz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Running higher than 400 BPS?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: homemade ferrite torroid, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Epoxy breakdown voltage -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Is high coil frequency a bad thing?, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: power output??, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Is high coil frequency a bad thing?, Mad Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) My First PIG and it's operation, dwight duncan (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Power Applied?, and further wiring t, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: toroids, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fired, but need help, Patti" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Advice sought for Safety Gaps, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Proposed capacitor design -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Important questions... -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Power Applied?, and further wiring t, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Lets do some HBT (was new HBT info for D, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Pigs and other barnyard experiments., Thomas Helwig" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap Experiments and more ?????, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) capacitor safety gaps, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Glass Caps, Etc., Adam Parker" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Important questions..., Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, OttFritz-at-aol-dot-com (by way of Terry Fritz )
(0) Re: capacitor safety gaps, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Pole pig TAPS??, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Important questions..., Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: My First PIG and it's operation, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Experiments and more ?????, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) High coil frequency, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Lets do some HBT (was new HBT info f, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Cap Experiments and more ?????, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Candlestick coil, D Mills (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RSG's different shape electrodes, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fired, but need help, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My First PIG and it's operation, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Floating pigs, Jeff Larson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Power Applied?, and further wiring t, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Glass Caps, Etc., Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fired, but need help, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fw: Ground current, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Pigs and other barnyard experiments., Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) arc welder in series, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Pole pig TAPS??, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Open House, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) To Cabbott: About coupling, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Floating pigs, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Floating pigs, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: capacitor safety gaps, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: BL in TC arcs, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Crazy idea for a spark gap, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Question, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Running higher than 400 BPS?, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: toroids, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Self-built power transformer, Wes A Brzozowski (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Oops ? To A.C Kuntz, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Pole pig TAPS??, Eric Davidson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Fired, but need help, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My First PIG and it's operation, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Pole pig TAPS??, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: capacitor safety gaps, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Floating pigs, Eric Davidson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Experiments and more ?????, Tesla Technology Australia Pty Ltd (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fired, but need help, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Self-built power transformer, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) More HBTing, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Fired, but need help, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Important questions..., Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Cap Experiments and more ?????, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Pole pig TAPS??, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: capacitor safety gaps, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Lets do some HBT (was new HBT info f, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Self-built power transformer, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Self-built power transformer (some d, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Pigs and other barnyard experiments., Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More HBTing, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) My Tesla page has moved!, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Experiments and more ?????, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: arc welder in series, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My First PIG and it's operation, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer (some d, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Military surplus TC, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Phase Power & Fuses, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Gary Lau's Tesla Coil Web page, Gary Lau 07-Oct-1998 0744 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap gaps, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) UK Pole Xfmr Question, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Military surplus TC, Mike Nolley (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) =?iso-8859-1?Q?Insulation_of_HBT=B4s?=, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: BL in TC arcs, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Compact capacitor design, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, wb8jkr-at-juno-dot-com (Mark S Graalman) (by way of Terry Fritz )
(0) Re: Oops ? To A.C Kuntz Oop, A.C. Kuntz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Toroid = shorted turn ?, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Crazy idea for a spark gap, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Military surplus TC, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Military surplus TC, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Military surplus TC, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Power Applied?, and further wiring t, Tony Lekas (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Insulation of HBT s, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Still Oops..., RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Oops ? To A.C Kuntz Oop, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Military surplus TC, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Experiments and more ?????, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UK Pole Xfmr Question, Julian Green (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Oops ? To A.C Kuntz, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Oops ? To A.C Kuntz Oops ? To A.C Ku, A.C. Kuntz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Gary Lau's Tesla Coil Web page, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Gary Lau's Tesla Coil Web page, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Still Oops..., A.C. Kuntz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Phase Power & Fuses, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fired, but need help, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: where to buy the big variacs??, Edward J. Wingate" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Uk Pole Pig Question, Jan Prejbisz (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Still Oops..., Steve Roys (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Oops ? To A.C Kuntz Oops ? To A.C Ku, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Gary Lau's Tesla Coil Web page, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Magnifier Report, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Free Toroid, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UK Pole Xfmr Question, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Oops ? To A.C Kuntz Oop, Edward J. Wingate" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: BL in TC arcs, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, R M Craven" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Gary Lau's Tesla Coil Web page, Eleanor Flood (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Uk Pole Pig Question, Alan Sharp (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) HV/Neutral Pole Pig question??, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Open House, Cliff Fahrer (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Magnifier Report, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) =?iso-8859-1?Q?Insulation_of_HBT=B4s_-Re, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifier Report, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, bertpool-at-ticnet-dot-com (by way of Terry Fritz )
(0) Re: Toroid = shorted turn ?, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Arc Impedance Study, Terry Fritz
(0) Re: arc welder in series, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Oops ? To A.C Kuntz Oop, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Experiments and more ?????, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap Experiments and now less ??, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Double dielectric capacitors?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Double dielectric capacitors?, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Insulation of HBT s, Harri Suomalainen" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Compact capacitor design, Harri Suomalainen" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap gaps, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Experiments and now less ??, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: arc welder in series, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Cap Experiments and now less ?? -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Open House, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz )
(0) Re: Uk Pole Pig Question, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Welder ballasts vs. other types (was Oop, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: BL in TC arcs, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: BL in TC arcs, dwight duncan (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Experiments and now less ??, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Help needed for primary..., Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) UK Pole Pig, Jan Prejbisz (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Double dielectric capacitors?, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Terry Fritz
(0) Re: Toroid = shorted turn ?, R M Craven" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Alternitives to pigs & nsts, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Welder ballasts vs. other types (was, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?Experiment:, Teslaman-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Cap Experiments and more ?????, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Terry Fritz
(0) Re: Cap gaps, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) PE or not? Cap Experiments, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: BL in TC arcs, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Magnifier Report, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Double dielectric capacitors?, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) My extended-foil cap failed, Gary Lau 10-Oct-1998 1204 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, fprice3 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Welder ballasts vs. other types (was, Edward J. Wingate" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Help needed for primary..., Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Arc Impedance Study - Computer Models, Terry Fritz
(0) Re: My extended-foil cap failed, Jeff W. Parisse" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My extended-foil cap failed, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, R M Craven" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifier Report, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Toroid = shorted turn ?, R M Craven" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Welder ballasts vs. other types, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Magnifier Report, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Magnifier Report, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Help needed for primary..., Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Bypass Caps?, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Terry Fritz
(0) [Fwd: Cap Experiments and more ?????], Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study - Computer Model, Terry Fritz
(0) Re: Arc Impedance Study - Computer Model, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fw: Arc Impedance Study - Computer Model, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) My extended-foil cap failed.... To Gary:, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) BL IN TC ARCS PHOTOS!, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study - Computer Model, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My extended-foil cap failed, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Ceramic Tank Circuit Caps, Gwyn Zucca (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Terry Fritz
(0) Re: Arc Impedance Study - Computer Model, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study - Computer Model, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) HELP!! with a pole pig....., mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Weird cylindrical spark gap, Doug Brunner (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: BL IN TC ARCS PHOTOS!, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ceramic Tank Circuit Caps, Terry Fritz
(0) Extended foil Cap. design, John Timmins (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New coil, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifier Report, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Welder ballasts vs. other types (was, Teslaman-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Magnifier Report, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My extended-foil cap failed, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Help needed for primary..., Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) BL prove-it-with a mirror, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Kraft paper?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Double dielectric capacitors?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ceramic Tank Circuit Caps, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Ceramic Tank Circuit Caps, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Weird cylindrical spark gap, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ceramic Tank Circuit Caps, Terry Fritz
(0) =?iso-8859-1?Q?Re:_Insulation_of_HBT=B4s, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) For Sale, Small toroids, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Extended foil Cap. design, Vacuum pump, Gary Lau 12-Oct-1998 1322 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Toroid = shorted turn ?, ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz )
(0) Re: Extended foil Cap. design, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Toroid = shorted turn ?, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Self-built power transformer, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Welder ballasts vs. other types, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Arc Impedance Study - Computer Model, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifier Report, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Arc Impedance Study - Computer Model, Terry Fritz
(0) Re: HELP!! with a pole pig.., Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifier Report, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study - Computer Model, Terry Fritz
(0) Re: [Fwd: Cap Experiments and more ?????, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Fw: Arc Impedance Study - Computer M, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Terry Fritz
(0) Re: Fw: Arc Impedance Study - Computer M, Terry Fritz
(0) Re: Arc Impedance Study - Computer Model, Terry Fritz
(0) Fw: message to send to tesla coil list (, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study - Computer Model, A.C. Kuntz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study - Computer Model, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) tube coils, Parpp807-at-aol-dot-com (by way of Terry Fritz )
(0) Black PE any good for caps?, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Extended foil Cap. design, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New data resource, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ceramic Tank Circuit Caps, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Toroid = shorted turn ?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifier Report, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Welder ballasts vs. other types, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Impedance Study, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Terry Fritz
(0) Re: Black PE any good for caps?, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Capacitor testing, Shadow Stalker (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Magnifier Questions, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Black PE any good for caps?, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Magnifier Report, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Black PE any good for caps?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) The vac pump problem, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Fw: Arc Impedance Study - Computer M, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Welder ballasts vs. other types, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Microwave Cap Question, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Another Tube find, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Black PE any good for caps?, Steve Roys (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Toroid = shorted turn ?, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Black PE any good for caps? -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: where to buy the big variacs?? (C&H , Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Capacitor testing, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Black PE any good for caps?, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Stats of my new capacitor, Aric_C_Rothman-at-email.whirlpool-dot-com (Aric C Rothman) (by way of Terry Fritz )
(0) Re: Welder ballasts vs. other types, Edward J. Wingate" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Pole pig TAPS??, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Saving the Garage Door Opener?, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New FCC proposed rule may exempt Part 15, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Fw: Arc Impedance Study - Computer M, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Fw: Arc Impedance Study - Computer M, Terry Fritz
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Stats of my new capacitor, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: New FCC proposed rule may exempt Par, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Saving the Garage Door Opener?, Gary Lau 13-Oct-1998 2156 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) NST Resonant Charging?, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Coil form material...., Ben McMillen" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Stats of my new capacitor, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Starter coils, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Quik Question.., mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Stats of my new capacitor, Aric (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) watch those fingers, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Stats of my new capacitor, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Stats of my new capacitor, Jeff Larson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Saving the Garage Door Opener?, Jeff Larson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Coiler Formers: a lossy mystery, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Saving the Garage Door Opener?, bertpool-at-ticnet-dot-com (by way of Terry Fritz )
(0) Re: Quik Question.., FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Coiler Formers: a lossy mystery -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: My extended-foil cap failed, Harri Suomalainen" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Calendar, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Welder ballasts vs. other types, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Stats of my new capacitor -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Quik Question.., Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Coaxial Capacitor?, Bob Wroblewski (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Saving the Garage Door Opener?, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: watch those fingers, Terry Fritz
(0) Do Not Stare Into Laser With Remaining E, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Stats of my new capacitor, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: UK Pole Pig Question, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: watch those fingers, Wysock, William C." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) leaking lexan, was: Stats of my new capa, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Terry Fritz
(0) RE: NST Resonant Charging?, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) More arc simulations, FRITZ, TERRY" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coiler Formers: a lossy mystery, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Quik Question.., Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) UK Pole Pig - to Martin Dale, Jan Prejbisz (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) arc welders in parallel, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coaxial Capacitor?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: watch those fingers, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Calendar, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: cut off my finger today, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Microwave Cap Question, David Dean" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coil form material...., Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Quik Question.., D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: New data resource, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: New FCC proposed rule may exempt Par, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Calendar, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: watch those fingers, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coil form material...., Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Starter coils, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: watch those fingers, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: watch those fingers, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Calendar, Charles Brush (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Compressible stuff in your capacitor, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Dielectric strength vs. thickness ?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coaxial Capacitor?, Jeff Larson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: watch those fingers, dkemper" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cheap high current variac source, Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Calendar, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Starter coils, ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz )
(0) RE: UK Neon Sign Transformers, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Mark S. Rzeszotarski, Ph.D." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Secondary size, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Bill Wysock on TV, Thornton, Russ #CSR2000" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Compressible stuff in your capacitor, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) spiral secondary ?, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) MicroSim PSpice demo, Gary Lau 15-Oct-1998 1115 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) FW: HV rectifier data anyone?, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: More arc simulations, Mark S. Rzeszotarski, Ph.D." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: NST Resonant Charging?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Coaxial Capacitor?, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap Safety System, Thomas McGahee" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Saving the Garage Door Opener?, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UK Neon Sign Transformers, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Calendar, bob golding (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: FW: HV rectifier data anyone?, Phillip D. Rembold" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) A Vote for a Common Language.(Schematics, Steven Ivy (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Our friend the FCC, Gomez (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Here pig pig pig, Gomez (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: A Vote for a Common Language.(Schema, Terry Fritz
(0) Re: spiral secondary ?, Tesla Technology Australia Pty Ltd (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Terry Fritz
(0) Re: FW: HV rectifier data anyone?, Kristian Ukkonen (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Question, computer freak
(0) Models online, Terry Fritz
(0) Re: More arc simulations, Terry Fritz
(0) Re: Coaxial Capacitor?, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: spiral secondary ?, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Calendar, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Secondary spacing for my large coil...an, Clay Wilson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) scary idea, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: what's a starter coil, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Terry Fritz
(0) Re: arc welders in parallel, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, John W. Gudenas,Ph.D." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: A Vote for a Common Language.(Schema, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: what's a starter coil, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary size, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Coilers in London (U.K), D Mills (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: spiral secondary ?, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: NST Resonant Charging?, Mark S. Rzeszotarski, Ph.D." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Question, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: scary idea, AuroraOne-at-webtv-dot-net (by way of Terry Fritz )
(0) Re: Coaxial Capacitor?, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: A Vote for a Common Language.(Schema, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Calling UK Coilers :), Richard Yarnall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: scary idea, computerfreak-at-webtv-dot-net (computer freak) (by way of Terry Fritz )
(0) Re: Glossary, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Question, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: scary idea, wb8jkr-at-juno-dot-com (Mark S Graalman) (by way of Terry Fritz )
(0) Re: scary idea, Marcus Young (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Compressible stuff in your capacitor, Harri Suomalainen" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: A Vote for a Common Language.(Schema, Gary Lau 16-Oct-1998 0820 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: scary idea, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Starter coils, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: scary idea, Gomez (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NST Resonant Charging?, Terry Fritz
(0) Re: Coilers in London (U.K), wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Secondary spacing for my large coil...an, ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz )
(0) Vacuum Tubes, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Dielectric strength vs. thickness ?, L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) not so scary idea, Steve Z (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: spiral secondary ?, L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Vacuum Tubes, Stephen G. Stanton" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UK Neon Sign Transformers, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: A Vote for a Common Language.(Schema, A.C. Kuntz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: spiral secondary ?, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Secondary size, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: MOT's (was UK Neon Sign Transformers, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Vacuum Tubes, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Vacuum Tubes, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UK Neon Sign Transformers, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: spiral secondary ?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Many dry caps in series?, Gary Lau 17-Oct-1998 1702 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Very low Fo Coils (was:not so scary idea, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Vacuum Tubes, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Vacuum Tubes, Stephen G. Stanton" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) kVA's Tesla Vortex at FrightFair!!!, Jeff W. Parisse" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Many dry caps in series?, Tesla Technology Australia Pty Ltd (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOT's (was UK Neon Sign Transformers, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Many dry caps in series?, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: spiral secondary ?, L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: kVA's Tesla Vortex at FrightFair!!!, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Many dry caps in series?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Extended foil Cap. design, Vacuum pu, Clay Wilson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Vacuum Tubes, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Vacuum Tubes, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Vacuum Tubes, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: kVA's Tesla Vortex at FrightFair!!!, Jeff W. Parisse" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: kVA's Tesla Vortex at FrightFair!!!, Terry Perdue" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOT Filament Xfmrs (was Vacuum Tube, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Ohm's law, Parpp807-at-aol-dot-com (by way of Terry Fritz )
(0) Pole Pig 4800 volts at a few amps $85.00, Charles Brush (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Models online, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Book came in, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New coil Online, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fw: Arc Impedance Study - Computer M, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Capacitor testing, Shadow Stalker (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOT's (was UK Neon Sign Transformers, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ohm's law, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Many dry caps in series?, David Huffman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: kVA's Tesla Vortex at FrightFair!!!, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Polystyrene and oil?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE. Many dry caps in series?, Gary Lau 19-Oct-1998 0759 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Book came in, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Capacitor testing, Dsurfr-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Many dry caps in series?, Gary Lau 19-Oct-1998 1446 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Many dry caps in series?, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Efficiency, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Very low Fo Coils (was:not so scary , Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polystyrene and oil?, David Huffman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fixing GD Opener (was: Saving the Garage, Basura, Brian" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ohm's law, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RE. Many dry caps in series?, jim.fosse-at-bjt-dot-net (Jim Fosse) (by way of Terry Fritz )
(0) Polyethylene sources, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polystyrene and oil?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fixing GD Opener (was: Saving the Ga, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: kVA's Tesla Vortex at FrightFair!!!, Jeff W. Parisse" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fixing GD Opener (was: Saving the Ga, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Secondary size, bhelms-at-dialpoint-dot-net (Brian Helms) (by way of Terry Fritz )
(0) Toroid sizing- another maxim, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: kVA's Tesla Vortex at FrightFair!!!, Cliff Fahrer (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Book came in, B**2 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) HDPE found: check my capacitor, please, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Min / Max power requirements for given c, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RE. Many dry caps in series?, Gary Lau 20-Oct-1998 1306 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Polyethylene sources, Gary Lau 20-Oct-1998 1311 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Thanks for HV rectifier data, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOT Filament Xfmrs (was Vacuum Tube, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re[2]: Polystyrene and oil?, Aric_C_Rothman-at-email.whirlpool-dot-com (Aric C Rothman) (by way of Terry Fritz )
(0) Re: More arc simulations, Terry Fritz
(0) Re: Secondary size, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Secondary size, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary size, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re. HDPE found: check my capacitor, plea, Gary Lau 20-Oct-1998 1655 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: kVA's Tesla Vortex at FrightFair!!!, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RE. Many dry caps in series?, jim.fosse-at-bjt-dot-net (Jim Fosse) (by way of Terry Fritz )
(0) Arc Load Match, Terry Fritz
(0) Re: Secondary size, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Tesla Coil (No tank circuit or Cap's req, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Roofing Rubber, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Arc Load Match, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polystyrene and oil?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. HDPE found: check my capacitor, , Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Direct current coils, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Roofing Rubber, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tesla Coil (No tank circuit or Cap's, fprice3 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Still more ballast problems w/Pig, dwight duncan (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Roofing Rubber, Dsurfr-at-aol-dot-com (by way of Terry Fritz )
(0) Capacitor materials, Aric_C_Rothman-at-email.whirlpool-dot-com (Aric C Rothman) (by way of Terry Fritz )
(0) Re: Polyethylene sources, Dsurfr-at-aol-dot-com (by way of Terry Fritz )
(0) Polycarbonate Glue, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Direct current coils, Dr. John W. Gudenas" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary size, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re. HDPE found: check my capacitor, plea, Gary Lau 21-Oct-1998 0923 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) First coil I built (More tests!), R.E.Burnett" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary size, Wysock, William C." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) HV Caps for a first Coil, Guy and Bettina" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Transformer suitability for a first coil, Guy and Bettina" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Vacuum Tubes, Stephen G. Stanton" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Safety gap experiment, Gary Lau 21-Oct-1998 1843 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue, Clay Wilson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: HV Caps for a first Coil, BAREN01-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Polycarbonate Glue, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils (was:not so scary , Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Transformer suitability for a first , Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: HV Caps for a first Coil, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Polycarbonate Glue, Chuck Curran" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fine Tuning a Spark Gap, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue, Aric (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue, Teslaman-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Secondary size, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re HV Caps for a first Coil, Gary Lau 21-Oct-1998 2049 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary size, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary size, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First coil I built (More tests!), Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Some tests with a 2.25" coil, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. HDPE found: check my capacitor, , Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Black HDPE testing, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. HDPE found: check my capacitor, , Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: HV Caps for a first Coil, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. HDPE found: check my capacitor, , Harri Suomalainen" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tesla Coil (No tank circuit or Cap's, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re HV Caps for a first Coil, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Polyethylene/Al Foil Source question, Andrew Chin (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) 5514-tubes, Grayson Dietrich" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: HDPE found: check my capacitor, plea, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) My Capacitor, D Mills (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Still more ballast problems w/Pig, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re. Some tests with a 2.25" coil, Gary Lau 22-Oct-1998 0850 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Grid Leak, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polyethylene/Al Foil Source question, Tesla Technology Australia Pty Ltd (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Still more ballast problems w/Pig, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) grid leak, Parpp807-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Polyethylene/Al Foil Source question, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Grid Leak, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Re HV Caps for a first Coil, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: 5514-tubes, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Direct current coils, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary size, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: HV Caps for a first Coil, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Secondary size, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First coil I built (More tests!), Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Ballasting ..... Again, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Still more ballast problems w/Pig, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. HDPE found: check my capacitor, , Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polycarbonate Glue -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re HV Caps for a first Coil, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Black HDPE testing continued..., Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polyethylene/Al Foil Source question, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Ballasting ..... Again, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) TC items for sale - Seattle area, Terry Perdue" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballasting ..... Again, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Polystyrene best WWW pages, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Polyethylene/Al Foil Source question, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballasting ..... Again, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Arc Load Match, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballasting ..... Again, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Some tests with a 2.25" coil (Follow, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More arc simulations, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Ions n' arcs, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) 5514 tubes, Steve Z (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Arc Load Match (bleeding edge) OUCH!!, Terry Fritz
(0) LDPE, HDPE,rolls and bags..., johnquepublic-at-juno-dot-com (John Q Public) (by way of Terry Fritz )
(0) Re: Direct current coils, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) grid dip meters, Parpp807-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Ballasting ..... Again, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: watch those fingers, Eleanor Flood (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tesla Coil (No tank circuit or Cap's, fprice3 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ballasting ..... Again, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) MOT Experiment, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballasting ..... Again, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. HDPE found: check my capacitor, , Mike Nolley (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballasting ..... Again, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. HDPE found: check my capacitor, , Mike Nolley (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOT Experiment, Terry Fritz
(0) Re: 5514 tubes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Positive VS negative streamer, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Sparks in Georgia, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: watch those fingers, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Direct current coils, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: 5514 tubes, 811 tube amp, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Sparks in Georgia, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils, L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOT Experiment, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) [newbie] it this transformer ok?, Paolo (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Sparks in Georgia, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Moderator note, Terry Fritz
(0) Sparks in Georgia, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ions n' arcs, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: [newbie] it this transformer ok?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Direct current coils, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Thin Foil, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: [newbie] it this transformer ok?, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) non-polar electrolytic cap, Paul R. Eitson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: non-polar electrolytic cap, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Thin Foil, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: non-polar electrolytic cap, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: non-polar electrolytic cap, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Very low Fo Coils, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Positive VS negative streamer, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Positive VS negative streamer, Terry Fritz
(0) Re: Secondary size, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) multipliers as capacitors, unknown sender" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Positive VS negative streamer, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) H&R Transformers, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Positive VS negative streamer, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Is this a potential transformer?, Aric_C_Rothman-at-email.whirlpool-dot-com (Aric C Rothman) (by way of Terry Fritz )
(0) Re: Positive VS negative streamer, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Rolled cap margins?, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Mot Weirdness, and other bizzare things, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ions n' arcs, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) MOT Experiments, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Calorimetry: Sparks in Georgia, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Kip's DC Tesla Coil, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) more spooks?, Parpp807-at-aol-dot-com (by way of Terry Fritz )
(0) Re: MOT Experiment, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Orange Jacobs Ladders & more fun with ar, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) H&R Transformers, Steve Z (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) info wanted, Marc Boiy" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) MOTs, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: MOT Experiments, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) DC coil, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOT Experiments, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Is this a potential transformer?, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: H&R Transformers, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Arcs and Sparks newsletter, Lyonelb-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Orange Jacobs Ladders & more fun wit, bob golding (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOTs, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: info wanted, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOTs, Aric_C_Rothman-at-email.whirlpool-dot-com (Aric C Rothman) (by way of Terry Fritz )
(0) Photos of FrightFAIR!, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: info wanted, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOTs, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Photos of FrightFAIR!, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: info wanted, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Orange Jacobs Ladders & more fun wit, Wes A Brzozowski (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: info wanted, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: info wanted, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Spark Gap Question, computerfreak-at-webtv-dot-net (computer freak) (by way of Terry Fritz )
(0) Hey Sam (was Re: info wanted), RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: info wanted, BAREN01-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Fine Tuning a Spark Gap, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Positive VS negative streamer, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: info wanted, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Spark Gap Question, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Natural RF suppression?, Gary Lau 28-Oct-1998 0735 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) EMR, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Positive VS negative streamer, Terry Fritz
(0) Re: info wanted, Kristian Ukkonen (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Super simple beginner coils, Terry Fritz
(0) Re: Natural RF suppression?, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Positive VS negative streamer, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Natural RF suppression?, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Unpotted neon, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Technoplis, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Big bangs from MOT, Julian Green (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Super simple beginner coils, Mike Nolley (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Super simple beginner coils, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Frequency dependent dielectrics, Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unpotted neon, Dan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, Wysock, William C." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Terry Fritz
(0) Any info available on Vacuum Gaps?, Dan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Sam Barros got hurt, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unpotted neon, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Any info available on Vacuum Gaps?, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, Gary Lau 29-Oct-1998 1234 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Big bangs from MOT, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Dan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Big bangs from MOT, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Super simple beginner coils, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) MOT saturation, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Frequency dependent dielectrics, rwall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, A.C. Kuntz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Natural RF suppression?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Kristian Ukkonen (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Frequency dependent dielectrics, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Intro and NST hints, NeonGlow-at-webtv-dot-net (Tony Greer) (by way of Terry Fritz )
(0) Re: Natural RF suppression?, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Super simple beginner coils, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Fine Tuning a Spark Gap, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Frequency dependent dielectrics, Marco Denicolai (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Intro and NST hints, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Transformer design (was: Frequency depen, Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Coil specs:, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Unusual capacitor dielectrics, Jacob Roberto (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Intro and NST hints, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Super simple beginner coils, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Super simple beginner coils, JonS999-at-aol-dot-com (by way of Terry Fritz )
(0) spark gap question, Thomas Helwig" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual Capacitor Dielectrics, cwillis4-at-juno-dot-com (carl a willis) (by way of Terry Fritz )
(0) Re: Transformer design (was: Frequency d, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) FrightFair Coil Specs, Jeff W. Parisse" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: MOTs, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Many dry caps in series, Gary Lau 30-Oct-1998 1345 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Positive VS negative streamer, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: EMR, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Any info available on Vacuum Gaps?, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual capacitor dielectrics, Steven Ivy (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual capacitor dielectrics, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Intro and NST hints, Tony Greer
(0) Re: Super simple beginner coils, Terry Fritz
(0) Re: Coil specs:, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coil specs:, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re. Many dry caps in series, Gary Lau 30-Oct-1998 1900 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fine Tuning a Spark Gap, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Any info available on Vacuum Gaps?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual capacitor dielectrics, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coil specs:, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Unusual capacitor dielectrics, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual capacitor dielectrics, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fine Tuning a Spark Gap and more, RWB355-at-aol-dot-com (by way of Terry Fritz )

Mail converted by MHonArc 1.2.3