Re: Salvage!

• To: tesla-at-pupman-dot-com
• Subject: Re: Salvage!
• From: Doug Brunner <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Sun, 04 Oct 1998 20:26:16 -0600
• Approved: terryf-at-verinet-dot-com

As Bob pointed out, though, it's absolute hell to get off. I'm still trying
to rip open some old xfmrs I have. If you're really patient, try a hacksaw,
but be sure it's in a vise...

Tesla List wrote:

> Original Poster: Doug Brunner <dabrunner-at-earthlink-dot-net>
>
> 22 works great for a secondary. Even 26 or maybe 28 would be fine. I'm
> winding mine with 24.
>
> Tesla List wrote:
>
> > Original Poster: "chris morgan" <crmorgan-at-hotmail-dot-com>
> >
> > I was lookin at the MOT I pulled out of my aunt's dearly departed
> > microwave, and couldn't help but to notice that the secondary is wound
> > with a wire just a bit unde 22 guage.  Does anyone know if this is
> > sutable for a secondary coil, because if it is, adn I can't get more to
> > build a power supply, its days are numbered.  Mabee if I get REAL
> > desperate I'll have a free tesla coil.
> >
> > ______________________________________________________
> > Get Your Private, Free Email at http://www.hotmail-dot-com
>
> --
>            --Mr. Postman (Doug Brunner)
>                 <dabrunner-at-earthlink-dot-net>



--
           --Mr. Postman (Doug Brunner)
                <dabrunner-at-earthlink-dot-net>

• Prev: RE: Self-built power transformer
• Next: Re: Self-built power transformer (some design parameters)
• Index(es):
  • Main
  • Thread