Re: Very low Fo Coils (was:not so scary idea)

• To: tesla-at-pupman-dot-com
• Subject: Re: Very low Fo Coils (was:not so scary idea)
• From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Wed, 21 Oct 1998 23:32:41 -0600
• Approved: terryf-at-verinet-dot-com

"to: Ed

This was one of David Sloan's designs for G.E. who used it to drive an
x-ray machine.  Vacuum tube driven at 150 kva with 100 kva output at 1
mev.

DR.RESONANCE-at-next-wave.anet"

	Isn't Sloan the fellow who made a long, skinny coil which he ran in a
vacuum?  I didn't remember the input as being that high, since it was a
relatively small coil.  Perhaps something different.  The coil mentioned
in the original post was reported to run at 180 Hz, driven by a tripler
from 60 Hz.  Was this wrong, or are you referring to a different coil?  

Ed

• Prev: RE: Polycarbonate Glue
• Next: RE: Transformer suitability for a first coil
• Index(es):
  • Main
  • Thread