Mail Thread Index

Main Index

(0) No Subject,
(0) No Subject,
(0) No Subject,
(0) Re: Cheap 20nF 20kV pulse caps - If it w, HomerLea-at-aol-dot-com (by way of Terry Fritz )
(0) Maxwell Labs cap. questions, NeonGlow-at-webtv-dot-net (Tony Greer) (by way of Terry Fritz )
(0) Re: Unusual capacitor dielectrics, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. Cheap 20nF 20kV pulse caps - If , Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. Cheap 20nF 20kV pulse caps - If , Terry Fritz
(0) Re: Unusual Capacitor Dielectrics, HomerLea-at-aol-dot-com (by way of Terry Fritz )
(0) Re: foil enamal caps, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: foil enamal caps, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: foil enamal caps, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Unusual capacitor dielectrics, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Oil burner transformer--run at 2X vo, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Maxwell Labs cap. questions, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: foil enamal caps, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: foil enamal caps, Matthew Shaffer" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Edward J. Wingate" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Many dry caps in series, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual capacitor dielectrics, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Sphere & Toroid Experements, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual Capacitor Dielectrics, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Pseudospark, L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Gary Lau's gap, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Sam Barros injury update, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) "condensers", ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Electrical Frankenstein Show, David Huffman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) LA Trip, Michael Tucknott (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Jonathan Bazemore (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: foil enamal caps, Jeff Larson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: newbie, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Capacitor construction, Aric_C_Rothman-at-email.whirlpool-dot-com (Aric C Rothman) (by way of Terry Fritz )
(0) Re: Halloween night, CP cap {con,de}stru, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Maxwell Labs cap. questions, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Halloween night, CP cap {con,de}stru, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Tuning and Performance Questions (6.5" c, Basura, Brian" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Looking for 15 kV/60 mA neon, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Pseudospark, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Sphere & Toroid Experements, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: "condensers", RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Sphere & Toroid Experements, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: foil enamal caps, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tuning and Performance Questions (6., Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: foil enamal caps, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Capacitors........., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Clay Wilson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Please give specs 300W 54" TC, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tuning and Performance Questions (6., Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Electrical Frankenstein Show, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Gary Lau's gap, Gary Lau 02-Nov-1998 2252 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Laser Triggered Spark Gap, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Pseudospark, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Capacitors........., Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Sphere & Toroid Experements, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Paolo (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) foil enamal caps, teslafreak (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) belgian builders???, marc boiy" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) thanks to all who gave me info,, marc boiy" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: "condensers", Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: CP Capacitors - Halloween, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Ballast, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) 15 kva into a 8" dia coil, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Charles Brush (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Laser Triggered Spark Gap, ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz )
(0) Capacitor death & VHF parasitics, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Re: Electrical Frankenstein Show, KRAMPF-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Laser Triggered Spark Gap, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. Cheap 20nF 20kV pulse caps - If , Harri Suomalainen" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Triggered Spark Gap, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: foil enamal caps, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Laser Triggered Spark Gap, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Please give specs 300W 54" TC, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Gary Lau's gap, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Laser Triggered Spark Gap, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Tuning and Performance Questions (6., Basura, Brian" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Designing safety from the beginning., gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz )
(0) Re: Laser Triggered Spark Gap, JFSTROM-at-aol-dot-com (by way of Terry Fritz )
(0) Shellac coating, cwillis4-at-juno-dot-com (carl a willis) (by way of Terry Fritz )
(0) Re: Halloween night, CP cap {con,de}stru, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 15 kva into a 8" dia coil, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Electrical Frankenstein Show, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) 6" coil, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Capacitors........., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Ballast, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Shellac coating, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 15 kva into a 8" dia coil, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) possible spark gap ?, Chris Swinson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballast, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: 6" coil, Mark E Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Charles Brush (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballast, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballast, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 15 kva into a 8" dia coil, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 15 kva into a 8" dia coil, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Triggered spark gap, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gap, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re:(Laser Triggered Spark Gap)not, Steven Ivy (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 15 kva into a 8" dia coil, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) NOT-Laser Triggered Spark Gap, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 15 kva into a 8, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Sphere & Toroid Experements, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Designing safety from the beginning., Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Designing safety from the beginning., Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Capacitors........., Gary Lau 04-Nov-1998 1307 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Electrical Frankenstein Show, KRAMPF-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Maxwell Labs cap. questions, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ballast, Chuck Curran" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Tube coil frequency& oil resistance, Grayson Dietrich" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ballast, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Florida Coilers?, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Nitrogen laser power level and gas mixtu, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ballast, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RSG pictures, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) UV triggered SG, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual Capacitor Dielectrics, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Bylund Solid State Mag., R M Craven" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 15 kva into a 8" dia coil, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Ballast, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Small-ish polyprop. caps, Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Super simple beginner coils, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) RE: Designing safety from the beginning., Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unusual capacitor dielectrics, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Home brew flash lamp for trigger, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 6" coil, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Small-ish polyprop. caps, Terry Fritz
(0) Re: Unusual capacitor dielectrics, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Designing safety from the beginning., RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Capacitors........., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Designing safety from the beginning., mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Nitrogen laser power level and gas m, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube coil frequency& oil resistance, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NOT-Laser Triggered Spark Gap, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Nitrogen laser power level and gas m, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Moderator Note, Terry Fritz
(0) Re: Nitrogen laser power level and gas m, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: NOT-Laser Triggered Spark Gap, adamrl1 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Small-ish polyprop. caps, Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UV triggered SG, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fwd: Ballast, Esondrmn
(0) Re: 6" coil, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) PSpice modeling of spark gaps, Gary Lau 06-Nov-1998 1003 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Thanks everybody!, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Rolled capacitor design, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Spec's on caps, Eddie Burwell (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Halloween night, CP cap {con,de}stru, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Bylund Solid State Mag., Alan Sharp (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Home brew flash lamp for trigger, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Nitrogen laser power level and gas m, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) capacitive or sat.reactor ballast?, Mad Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RSG pictures, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Nitrogen laser power level and gas m, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Nitrogen laser power level and gas m, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Bylund Solid State Mag., Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New pictures on www.pupman-dot-com website, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Nitrogen laser power level and gas m, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Nitrogen laser power level and gas m, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Bylund Solid State Mag., clara02-at-m8.sprynet-dot-com (by way of Terry Fritz )
(0) Re: Spec's on caps, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: PSpice modeling of spark gaps, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Triggered Spark Gaps - Why?, Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why?, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why?, BAREN01-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Laser Triggered Spark Gap, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Home Brew Pig, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: spark gap question, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Terry Fritz
(0) Re: Laser Triggered Spark Gap, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: capacitive or sat.reactor ballast?, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why?, B**2" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Triggered Spark Gaps - Why Not?, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cross for H439 Bridge, Choad" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) salt water caps and chem., chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Small-cap success - well kind of..., Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Nitrogen laser power level and gas m, Mike Nolley (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Nitrogen laser power level and gas m, Terry Fritz
(0) Re: Triggered Spark Gaps - Why?, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why Not?, Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Home Brew Pig, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: spark gap question, Terry Fritz
(0) Transformer cores, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: capacitive or sat.reactor ballast?, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Terry Fritz
(0) Sync Spark Gap Scope Pic, Terry Fritz
(0) Coil stats list, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Terry Fritz
(0) Re: PSpice modeling of spark gaps, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Beginner's coil, Terry Fritz
(0) More on small caps (with a bang), Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Capacitor construction?, David Knaack" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Capacitor construction?, Terry Fritz
(0) Re: Transformer cores, Teslaman-at-aol-dot-com (by way of Terry Fritz )
(0) Re: salt water caps and chem., Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Terry Fritz
(0) Re: Sync Spark Gap Scope Pic, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: PSpice modeling of spark gaps, Keith Nagel (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Transformer cores, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: RSG pictures, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Primary current and voltage effects, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) UK : potential transformers etc. in auct, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Transformer cores, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More on small caps (with a bang), Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Transformer cores, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Spec's on caps, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Terry Fritz
(0) Re: Transformer cores, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) T&R pole pigs.., mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Gary Lau 09-Nov-1998 1252 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Charles Brush (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More on small caps (with a bang), Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Clay Wilson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Transformer cores, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Capacitor construction?, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why Not?, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Laser Triggered Spark Gap, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Beginners Tesla Coils, Steven Noorderbroek (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spec's on caps, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: More on small caps (with a bang), Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Uk coilers going to pickets lock radio r, D Mills (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Nitrogen laser power level and gas m, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: T&R pole pigs.., Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Envisioneering --- a Tesla research / pr, DamDeName-at-aol-dot-com (by way of Terry Fritz )
(0) Tesla Inventors Expo 1998, Teslagold-at-aol-dot-com (by way of Terry Fritz )
(0) Re: T&R pole pigs.., Rick Kirby (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Uk coilers going to pickets lock rad, Dale, Martin" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Uk coilers going to pickets lock rad, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Envisioneering --- a Tesla research , Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Beginners Tesla Coils, Matthew Shaffer" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why Not?, R M Craven" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Equa-drive system, dwight duncan (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fwd: Equa-drive system, Esondrmn
(0) Re: Triggered Spark Gaps - Why Not?, Michael Veach (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Uk coilers going to pickets lock radio r, Alan Sharp (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: capacitive or sat.reactor ballast?, Mad Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Jacob Roberto (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fwd: Equa-drive system, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Uk coilers going to pickets lock rad, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) streamer hit, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Anybody answering this? (Primary current, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Jacob Roberto (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Bylund Solid State Mag., Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why Not?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why Not?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Equations?, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Determine va capacity., Daniel Hess (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Triggered Spark Gaps - Why Not?, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: potential transformers etc. in aucti, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Terry Fritz
(0) Re: streamer hit, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Equa-drive system, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: T&R pole pigs.., mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Transformer cores, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Terry Fritz
(0) Re: streamer hit, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Charles Brush (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: T&R pole pigs.., Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: streamer hit, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Bill Wysock" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Equations?, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Transformer cores, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, ajones-at-wavegate-dot-com (by way of Terry Fritz )
(0) Re: streamer hit, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Transformer cores, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Triggered Spark Gaps - Why Not?, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Terry Fritz
(0) RE: Equa-drive system, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) VARIAC's, Gordon King (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: T&R pole pigs.., Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(1) Re: PSpice modeling of spark gaps, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)

(0) Re: PSpice modeling of spark gaps, Bryan Kaufman

(0) Re: streamer hit, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: streamer hit, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: streamer hit, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Variac info, Gordon King (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re: streamer hit, KRAMPF-at-aol-dot-com (by way of Terry Fritz )
(0) First Coil Works --Tuning Help, Adam Parker" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Equa-drive system, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First Coil Works --Tuning Help, Terry Fritz
(0) Cheap 20nF 20kV pulse caps, Terry Fritz
(0) Re: Equations?, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: VARIAC's, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: T&R pole pigs.., Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Better small-cap success., Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Anybody answering this? (Primary cur, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: streamer hit, Terry Fritz
(0) Re: T&R pole pigs.., Clay Wilson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) another ballast consideration, Mad Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: VARIAC's, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: VARIAC's -> parallel??, Terry Fritz
(0) Re: streamer hit, gweaver (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First Coil Works --Tuning Help, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: VARIAC's, Jim Monte (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Free variacs, Gary Lau 12-Nov-1998 2222 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap Material?, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: First Coil Works --Tuning Help, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Bigger secondary = longer streamers? (wa, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Variac Pics, Gordon King (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Stefan.Binder-at-t-online.de (Stefan Binder) (by way of Terry Fritz )
(0) Re: streamer hit, Paul Marshall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: another ballast consideration, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: T&R pole pigs.., Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: streamer hit, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: VARIAC's -> parallel??, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap Material? -Reply, ROBERT CRESSLER (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Material?, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Fu Manchu coil, Jonathan Bazemore (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First Coil Works --Tuning Help, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: another ballast consideration, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Cap Material?, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Bigger secondary = longer streamers?, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: streamer hit, David Huffman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: VARIAC's -> parallel??, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Material?, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) ComEd 'Excess Assets' Auction, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: PSpice modeling of spark gaps, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cap Material?, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cheap 20nF 20kV pulse caps, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Fu Manchu coil, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Ok.. where am I going wrong, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) transformer rewind, RON QUIRING" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Inductance and cap. meters, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First Coil Works --Tuning Help, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Help with Pig Training, Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginners Tesla Coils, gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz )
(0) Re: Ok.. where am I going wrong, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) how to begin??, marc boiy" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) vacum tubes, BAREN01-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Inductance and cap. meters, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Tube Coils, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: transformer rewind, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: streamer hit, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Inductance and cap. meters, Terry Fritz
(0) Gluing core laminates?, Wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Current draw ?, Wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Current draw ?, Terry Fritz
(0) Why NST's are doomed..., Gary Lau 14-Nov-1998 2223 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ok.. where am I going wrong, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Magnifier action!, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginners Tesla Coils, Mike Nolley (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: how to begin??, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, mike" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: streamer hit, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube Coils, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: vacum tubes, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Help with Pig Training, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Ok.. where am I going wrong, Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube Coils, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube Coils, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: streamer hit, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Current draw ?, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Help with Pig Training, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: streamer hit, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First Coil Works --Tuning Help, Adam Parker" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: info wanted, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginners Tesla Coils, clara02-at-m8.sprynet-dot-com (by way of Terry Fritz )
(0) Re: Gluing core laminates?, Adam Parker" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: how to begin??, Adam Parker" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) parts list, BAREN01-at-aol-dot-com (by way of Terry Fritz )
(0) Primary Q - A Brain Teaser, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 300W 54" TC specs: My questions, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Gluing core laminates?, Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Gap space measurements, Adam Parker" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Retuning with bigger cap?, Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: streamer hit, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Help with Pig Training, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First Coil Works --Tuning Help, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Beginner's Tesla coil -First Light!, Terry Fritz
(0) Re: Beginners Tesla Coils, KRAMPF-at-aol-dot-com (by way of Terry Fritz )
(0) Re: VARIAC's -> parallel??, bob golding (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginners Tesla Coils, gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz )
(0) Re: Primary Q - A Brain Teaser, ElectronX-at-aol-dot-com (by way of Terry Fritz )
(0) WinTesla 2.1.0 (fwd), Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) New Testing done and my 8" secondary, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) GM HEI Coil Autopsy, Terry Fritz
(0) Re: Retuning with bigger cap?, ElectronX-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Tube Coils, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Spinning pipes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ok.. where am I going wrong, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) spun aluminum, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) primary coil wire, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) info for beginners, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Not enough pimary inductance?, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Retuning with bigger cap?, Sam Laur (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: how to begin??, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Retuning with bigger cap?, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Why NST's are doomed..., Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's Tesla coil -First Light!, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Primary Q - A Brain Teaser, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: GM HEI Coil Autopsy, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Beginner's Tesla coil -First Light!, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginners Tesla Coils, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Mike Magnus" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Beginners Tesla Coils, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ok.. where am I going wrong, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Gluing core laminates?, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Primary Q - A Brain Teaser, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Today's stuff, Gomez (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Gap space measurements, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Q - A Brain Teaser, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube Coils, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Beginner's Tesla coil -First Light!, Terry Fritz
(0) Re: Gap space measurements, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Spinning pipes, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: New Testing done and my 8" secondary, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Primary Q - A Brain Teaser, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First Coil Works --Tuning Help, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Beginners Tesla Coils, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: vacum tubes, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: primary coil wire, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginners Tesla Coils, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube Coils, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: info for beginners, ElectronX-at-aol-dot-com (by way of Terry Fritz )
(0) Re: GM HEI Coil Autopsy, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Q - A Brain Teaser, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's Tesla coil -First Light!, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's Tesla coil -First Light!, Terry Fritz
(0) Re: GM HEI Coil Autopsy, Terry Fritz
(0) Beginner coil thoughts, FRITZ, TERRY" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Retuning with bigger cap?, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's Tesla coil -First Light!, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube Coils, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Capacitor material, Bill Fuller (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: primary coil wire, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Q - A Brain Teaser, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's Tesla coil -First Light!, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginners Tesla Coils, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Ignition coil measurements, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: info for beginners, gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz )
(0) Secondary coil forms, Bill Fuller (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Tesla club list?, Ross W. Overstreet" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ignition coil measurements, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) steam spark gaps, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: My 8" secondary, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Electronic Work bench; better than price, dwight duncan (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Secondary coil forms, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Beginners Tesla Coils, ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz )
(0) Re: primary coil wire, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Not enough pimary inductance?, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Gluing core laminates?, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Beginner coil thoughts, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Secondary coil forms, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: First Coil Works --Tuning Help, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: VARIAC's -> parallel??, Jim Monte (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My 8" secondary, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Beginner coil thoughts, Terry Fritz
(0) For Sale, small toroids, and now...coppe, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Secondary coil forms, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Q - A Brain Teaser, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Retuning with bigger cap?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary coil forms, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ok.. where am I going wrong, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ignition coil measurements, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ok.. where am I going wrong, Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ignition coil measurements, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: My 8" secondary, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, Dave Bell (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) welding elctrodes, Kevin Wahila" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Pole Pigs, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Antonio Carlos M. de Queiroz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Electronic Work bench; better than p, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: primary coil wire, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner coil thoughts, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: GM HEI Coil Autopsy, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Q - A Brain Teaser, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Electronic Work bench; better than p, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tesla club list?, ESchulz531-at-aol-dot-com (by way of Terry Fritz )
(0) Re: info for beginners, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Retuning with bigger cap?, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: GM HEI Coil Autopsy, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's Tesla coil -First Light!, gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz )
(0) Terry's GM HEI Coil Update., Terry Fritz
(0) Re: GM HEI Coil Autopsy, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: EWB; better than priced bread. Yes a, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) RE: Ignition coil measurements, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Q - A Brain Teaser, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: GM HEI Coil Autopsy, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ok.. where am I going wrong, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Electronic Work bench; better than p, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ignition coil measurements, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ignition coil measurements, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Corrected Ignition coil measurements, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Pole Pigs, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) High power HVDC cap design., Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Need Help., kc1-at-ime-dot-net (by way of Terry Fritz )
(0) Re: Spinning pipes, Daniel Hess (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary coil forms, Bill Fuller (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ignition coil measurements, Jim Lux" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., Jim Lux" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re Terry's GM HEI Coil, Gary Lau 18-Nov-1998 0843 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ok.. where (Calorimeter), Payne, Will E" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Beginner's coil safety, Terry Fritz
(0) Re: Corrected Ignition coil measurements, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: GM HEI Coil Autopsy, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Q - A Brain Teaser, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary coil forms, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) RF resistance of secondary coil, ElectronX-at-aol-dot-com (by way of Terry Fritz )
(0) Corrected Ignition coil measurements, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Coiler Question, conserning primary wind, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., D. E. Sharpe" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Ignition coil measurements, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) iron coir equation, BAREN01-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Primary Q - A Brain Teaser, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's coil safety, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) 803's in a Tesla Coil, Benjamin W. Bouxsein" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Need Help., Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Need Help., Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Massive Confusion., Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Need Help., Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's coil safety, Terry Fritz
(0) Tube pinouts, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Coiler Question, concerning primary , Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Need Help., Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) 801-A, Parpp807-at-aol-dot-com (by way of Terry Fritz )
(0) Re: welding elctrodes, Edward J. Wingate" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: iron coir equation, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil, Gary Lau 19-Nov-1998 0857 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Unknown tube: 7943 = BT145A = TQ 2/3, Kristian Ukkonen (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RF resistance of secondary coil, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Massive Confusion., Steve Rodway (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 803's in a Tesla Coil, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Not enough pimary inductance?, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Coiler Question, conserning primary , Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube pinouts, Kristian Ukkonen (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RF resistance of secondary coil, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: tesla-d Digest V98 #580, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Brazing transformer, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's Tesla coil -First Light!, L. Robertson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary coil forms, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: iron coir equation, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Tube pinouts, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Interesting bit of info on spark gaps an, bertpool-at-ticnet-dot-com (by way of Terry Fritz )
(0) Re: Need Help., Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) RE: RF resistance of secondary coil, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Ignition coil measurements, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Need Help., D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Massive Confusion., Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Massive Confusion., Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Attn: Rich, Bert & Terry- Growing large , Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Need Help., Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's coil safety, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Spinning pipes, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Massive Confusion., Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Many spark gap tests !, R.E.Burnett" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Antonio Carlos M. de Queiroz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UK coilers going to pickets lock rad, bob golding (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's coil safety, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coiler Question, conserning primary , James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Tube pinouts, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: 803's in a Tesla Coil, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: iron coir equation, BAREN01-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Terry's GM HEI Coil Update, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary coil forms, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) TC Secondary Terminal Design, John H. Couture" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Need Help., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Low voltage sparkgaps for ignition coil , Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Beginner's coil safety, Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Hi Tech Ignition Stuff, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Test message (fwd), Tesla List
(0) Test message two (fwd), Tesla List
(0) ATTENTION Aussie coliers, Marcus Young (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Massive Confusion., Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Not enough pimary inductance?, ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz )
(0) Re: UK coilers going to pickets lock rad, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Re: Secondary coil forms, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re. Many spark gap tests !, Gary Lau 20-Nov-1998 1159 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cauterodyne / Tesla Coil, Ross W. Overstreet" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: iron coir equation, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) re: Interesting bit of info on spark gap, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) A baby coiler is born!!, gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz )
(0) Re: iron coir equation, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Re. Many spark gap tests !, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Low voltage sparkgaps for ignition c, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: TC Secondary Terminal Design, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) wether or not to mess with repotting NST, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Cap question, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: iron coir equation, Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Massive Confusion., Mark Finnis (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Magnifier Questions, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: UK coilers going to pickets lock rad, Alan Sharp (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: TC Secondary Terminal Design, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) No Subject, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Primary Flashover, RODERICK MAXWELL (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Secondary coil forms and winding jig, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Current limiting, mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Java TC Calculator - JTCC, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) <ADMIN> List mailing schedule, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Wood, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Hello UK Coilers, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Primary Flashover, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Terry's GM HEI Coil Update., RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Low voltage sparkgaps for ignition c, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) UV sources for a triggered gap?, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Sparkplug Coils to Replace the Neon Sign, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) The Equa-Drive System, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Primary Flashover, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Wood, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Flashover, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: wether or not to mess with repotting, gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz )
(0) Re: Secondary coil forms and winding jig, David Sharpe (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: wether or not to mess with repotting, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Current limiting, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re. Cap question, Gary Lau 22-Nov-1998 1511 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: TC Secondary Terminal Design, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Coiler Question, conserning primary , Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Off-axis primary inductance, Gary Lau 22-Nov-1998 1518 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Not enough pimary inductance?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: TC Secondary Terminal Design, John Couture (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re. wether or not to mess with repotting, Gary Lau 22-Nov-1998 1534 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: TC Secondary Terminal Design, John Couture (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Need Help., Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Low voltage sparkgaps for ignition c, Jim Lux" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) GM HEI coil..., Terry Fritz
(0) Re: wether or not to mess with repotting, Tony Greer
(0) Re: Primary Flashover, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RF resistance of secondary coil, ElectronX-at-aol-dot-com (by way of Terry Fritz )
(0) magnifier, James Haycraft" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Fw: Terry's GM HEI Coil Update, James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Small coil of Richard Hull's, Matthew Mills (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Current limiting, Mike Nolley (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) High Voltage Rectifiers., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Top tubes., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Interesting bit of info on spark gap, Gregory R. Hunter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Caps for sale (forwarded by non-list per, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Off-axis primary inductance, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) IMPORTANT: RESEARCH ON WHAT?, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Using neons for limiting?, Wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Secondary coil form material?, Larry Fennigkoh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Small coil of Richard Hull's, Guy Wilson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) WW article, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Low voltage sparkgaps for ignition c, Sam Barros" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Secondary coil forms and winding jig, CompWiz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Cameron Cauterodyne, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Winding jigs: How I built mine, RWB355-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Low voltage sparkgaps for ignition c, Bryan Kaufman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Low voltage sparkgaps for ignition c, Antonio Carlos M. de Queiroz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Wood, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Off-axis primary inductance, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Off-axis primary inductance, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Wood, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) FIRST LIGHT!, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Off-axis primary inductance, ElectronX-at-aol-dot-com (by way of Terry Fritz )
(0) Area-31 Testing Range, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Resistive Ballast Success, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) For Sale: Variacs, NSTs, 155 KV Rectifi, Tedd Payne (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., James" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Moderator note - (Low voltage sparkgaps , Terry Fritz
(0) New images from R.W. Stephens, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: TC Secondary Terminal Design, John Couture (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) X-Ray HT power supply, Gavin Hubbard (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: IMPORTANT: RESEARCH ON WHAT?, Sulaiman Abdullah (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Using neons for limiting?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Low voltage sparkgaps for ignition c, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Attn: Rich, Bert & Terry- Growing la, Bert Hickman (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: FIRST LIGHT!, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Massive Confusion., Esondrmn-at-aol-dot-com (by way of Terry Fritz )
(0) Re: IMPORTANT: RESEARCH ON WHAT?, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Interesting bit of info on spark gap, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: Using neons for limiting?, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Low voltage sparkgaps for ignition c, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re. IMPORTANT: RESEARCH ON WHAT?, Gary Lau 24-Nov-1998 1057 (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Low voltage sparkgaps for ignition c, Jim Lux (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Terry's GM HEI Coil Update., Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Off-axis primary inductance, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: The Equa-Drive System, Malcolm Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) FIRST LIGHT II, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Variac for sale, Brad McPeak" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Antonio Carlos M. de Queiroz" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Terry Fritz
(0) Re: Small coil of Richard Hull's, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) search for a neon sign distributor in yo, chris morgan" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: X-Ray HT power supply, Wysock, William C." (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: X-Ray HT power supply, Bill the arcstarter" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Flyback Coil system, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: FIRST LIGHT!, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Attn: Rich, Bert & Terry- Growing la, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Interesting bit of info on spark gap, Greg Leyh (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Mica Caps for Tube coils, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Area-31 under scrutiny?, Robert W. Stephens" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Wound secondarys, Phililp Mac Duffie (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Primary Flashover, Roderick Maxwell (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Cliff Fahrer (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) <ADMIN, please read> List changes, Chip Atkinson (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Interesting bit of info on spark gap, wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz )
(0) Article by Malcolm Watts, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Wound secondarys, Barton B. Anderson" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: wether or not to mess with repotting, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Using neons for limiting?, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: Off-axis primary inductance, alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz )
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Growing large arcs, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Moderator's note, Terry Fritz
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Scott Stephens (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, John Couture (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Test message, please ignore (fwd), Tesla List
(0) Re: X-Ray HT power supply, Bryan Work (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, Bryan Work (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: X-Ray HT power supply, Ed Phillips (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RESEARCH AT HUT, Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Concerning a Potential Transformer., mel wise (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Flyback Coil system, Keith Garvin (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Wound secondarys, FutureT-at-aol-dot-com (by way of Terry Fritz )
(0) First coil - questions, Keith Garvin (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: IMPORTANT: RESEARCH ON WHAT/ follow , Dr. John W. Gudenas" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Flyback Coil system, David Sharpe (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Unknown tube: 7943 = BT145A = TQ 2/3, Kristian Ukkonen (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) WW Article, Vivian Watts" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: X-Ray HT power supply, Cabbott Sanders (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Off-axis primary inductance, Hollmike-at-aol-dot-com (by way of Terry Fritz )
(0) Re: IMPORTANT: RESEARCH ON WHAT?, rwall" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Introduction, Finn Hammer (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Off-axis primary inductance, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RESEARCH AT HUT, Richard Hull (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: IMPORTANT: RESEARCH ON WHAT/ follow , Marco Denicolai" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: Concerning a Potential Transformer., D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Coil Winder, David Sharpe (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Wavetek 27XT Sale, Steve Young" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: IMPORTANT: RESEARCH ON WHAT?, ElectronX-at-aol-dot-com (by way of Terry Fritz )
(0) Re: Concerning a Potential Transformer., Doug Brunner" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: First coil - questions, D.C. Cox" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) RE: First coil - questions, Coiler" (by way of Terry Fritz <terryf-at-verinet-dot-com>)
(0) Re: RESEARCH AT HUT, Bryan Work (by way of Terry Fritz <terryf-at-verinet-dot-com>)

Mail converted by MHonArc 1.2.3