Mail Index

• Thread Index

• No Subject
  • From:
• No Subject
  • From:
• No Subject
  • From:
• Re: Cheap 20nF 20kV pulse caps - If it would work??
  • From: HomerLea-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Maxwell Labs cap. questions
  • From: NeonGlow-at-webtv-dot-net (Tony Greer) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Unusual capacitor dielectrics
  • From: Steve Rodway <Legion-at-bigfoot-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Re. Cheap 20nF 20kV pulse caps - If it would work??
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Re. Cheap 20nF 20kV pulse caps - If it would work??
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Unusual Capacitor Dielectrics
  • From: HomerLea-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: "Steve Young" <youngs-at-konnections-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Unusual capacitor dielectrics
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Oil burner transformer--run at 2X voltage?
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Maxwell Labs cap. questions
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: "Matthew Shaffer" <dfive10-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: "Edward J. Wingate" <ewing7-at-frontiernet-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Many dry caps in series
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Unusual capacitor dielectrics
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Sphere & Toroid Experements
  • From: gweaver <gweaver-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Unusual Capacitor Dielectrics
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Pseudospark
  • From: "L. Robertson" <LWRobertson-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Gary Lau's gap
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Sam Barros injury update
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• "condensers"
  • From: ROBERT CRESSLER <59CREROB-at-menasha-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Electrical Frankenstein Show
  • From: David Huffman <huffman-at-fnal.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• LA Trip
  • From: Michael Tucknott <Michael.Tucknott-at-virgin-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Jonathan Bazemore <jpbazemo-at-ouray.cudenver.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: Jeff Larson <jflarson-at-starnetinc-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: newbie
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Capacitor construction
  • From: Aric_C_Rothman-at-email.whirlpool-dot-com (Aric C Rothman) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Maxwell Labs cap. questions
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Tuning and Performance Questions (6.5" coil)
  • From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Looking for 15 kV/60 mA neon
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Pseudospark
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Sphere & Toroid Experements
  • From: "Steve Young" <youngs-at-konnections-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: "condensers"
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Sphere & Toroid Experements
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tuning and Performance Questions (6.5" coil)
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Capacitors.........
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Clay Wilson <gasman-at-althea.a-line-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Please give specs 300W 54" TC
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tuning and Performance Questions (6.5" coil)
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Electrical Frankenstein Show
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Gary Lau's gap
  • From: Gary Lau 02-Nov-1998 2252 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Laser Triggered Spark Gap
  • From: "Steve Young" <youngs-at-konnections-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Pseudospark
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Capacitors.........
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Sphere & Toroid Experements
  • From: gweaver <gweaver-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: Paolo <pagaiard-at-geocities-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• foil enamal caps
  • From: teslafreak <Teslafreak-at-compuserve-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• belgian builders???
  • From: "marc boiy" <ON1DCV-at-mail.dma.be> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• thanks to all who gave me info,
  • From: "marc boiy" <ON1DCV-at-mail.dma.be> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: "condensers"
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: CP Capacitors - Halloween
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Ballast
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• 15 kva into a 8" dia coil
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Charles Brush <cfbrush-at-interport-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Laser Triggered Spark Gap
  • From: ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Capacitor death & VHF parasitics
  • From: "Dale, Martin" <martin.dale-at-ntu.ac.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Re: Electrical Frankenstein Show
  • From: KRAMPF-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Re. Cheap 20nF 20kV pulse caps - If it would work??
  • From: "Harri Suomalainen" <haba-at-cc.hut.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Triggered Spark Gap
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: foil enamal caps
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Please give specs 300W 54" TC
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Gary Lau's gap
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Laser Triggered Spark Gap
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Tuning and Performance Questions (6.5" coil)
  • From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Designing safety from the beginning.
  • From: gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: JFSTROM-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Shellac coating
  • From: cwillis4-at-juno-dot-com (carl a willis) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 15 kva into a 8" dia coil
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Electrical Frankenstein Show
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• 6" coil
  • From: RODERICK MAXWELL <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Capacitors.........
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ballast
  • From: "Bill the arcstarter" <arcstarter-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Shellac coating
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 15 kva into a 8" dia coil
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• possible spark gap ?
  • From: "Chris Swinson" <chris.swinson-at-zetnet.co.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ballast
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 6" coil
  • From: Mark E Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Charles Brush <cfbrush-at-interport-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ballast
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ballast
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 15 kva into a 8" dia coil
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 15 kva into a 8" dia coil
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Triggered spark gap
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gap
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re:(Laser Triggered Spark Gap)not
  • From: Steven Ivy <adder_black_the-at-yahoo-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 15 kva into a 8" dia coil
  • From: gweaver <gweaver-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• NOT-Laser Triggered Spark Gap
  • From: "Steve Young" <youngs-at-konnections-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 15 kva into a 8
  • From: "Paul Marshall" <klugmann-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Sphere & Toroid Experements
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Designing safety from the beginning.
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Designing safety from the beginning.
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Capacitors.........
  • From: Gary Lau 04-Nov-1998 1307 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Electrical Frankenstein Show
  • From: KRAMPF-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Maxwell Labs cap. questions
  • From: "Robert W. Stephens" <rwstephens-at-headwaters-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ballast
  • From: "Chuck Curran" <ccurran-at-execpc-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: "Steve Young" <youngs-at-konnections-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Tube coil frequency& oil resistance
  • From: "Grayson Dietrich" <greystone21-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ballast
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Florida Coilers?
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Nitrogen laser power level and gas mixture
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ballast
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RSG pictures
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• UV triggered SG
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Unusual Capacitor Dielectrics
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Bylund Solid State Mag.
  • From: "R M Craven" <craven-at-globalnet.co.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 15 kva into a 8" dia coil
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ballast
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Small-ish polyprop. caps
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Super simple beginner coils
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Designing safety from the beginning.
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Unusual capacitor dielectrics
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Home brew flash lamp for trigger
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 6" coil
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Small-ish polyprop. caps
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Unusual capacitor dielectrics
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Designing safety from the beginning.
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Capacitors.........
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Designing safety from the beginning.
  • From: "mike" <mike-at-gmx-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube coil frequency& oil resistance
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: NOT-Laser Triggered Spark Gap
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Moderator Note
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Nitrogen laser power level and gas mixture
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: NOT-Laser Triggered Spark Gap
  • From: adamrl1 <adamrl1-at-hi-line-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Small-ish polyprop. caps
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: UV triggered SG
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Fwd: Ballast
  • From: Esondrmn-at-aol-dot-com
• Re: 6" coil
  • From: RODERICK MAXWELL <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• PSpice modeling of spark gaps
  • From: Gary Lau 06-Nov-1998 1003 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Thanks everybody!
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Rolled capacitor design
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Spec's on caps
  • From: Eddie Burwell <eburwell-at-HIWAAY-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Halloween night, CP cap {con,de}struction
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Bylund Solid State Mag.
  • From: Alan Sharp <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Home brew flash lamp for trigger
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• capacitive or sat.reactor ballast?
  • From: "Mad Coiler" <tesla_coiler-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: RSG pictures
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Bylund Solid State Mag.
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• New pictures on www.pupman-dot-com website
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Bylund Solid State Mag.
  • From: clara02-at-m8.sprynet-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spec's on caps
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Triggered Spark Gaps - Why?
  • From: Gavin Hubbard <ghub005-at-xtra.co.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why?
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why?
  • From: BAREN01-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Home Brew Pig
  • From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: spark gap question
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Laser Triggered Spark Gap
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: capacitive or sat.reactor ballast?
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why?
  • From: "B**2" <bensonbd-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Triggered Spark Gaps - Why Not?
  • From: "Steve Young" <youngs-at-konnections-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Cross for H439 Bridge
  • From: "Choad" <choad69-at-geocities-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• salt water caps and chem.
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Small-cap success - well kind of...
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: Mike Nolley <mnolley-at-mail.slc.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Triggered Spark Gaps - Why?
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why Not?
  • From: Gavin Hubbard <ghub005-at-xtra.co.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Home Brew Pig
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: spark gap question
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Transformer cores
  • From: RODERICK MAXWELL <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: capacitive or sat.reactor ballast?
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Sync Spark Gap Scope Pic
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Coil stats list
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: PSpice modeling of spark gaps
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Beginner's coil
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• More on small caps (with a bang)
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Capacitor construction?
  • From: "David Knaack" <dknaack-at-idworld-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Capacitor construction?
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Transformer cores
  • From: Teslaman-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: salt water caps and chem.
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Sync Spark Gap Scope Pic
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Keith Nagel <knagel-at-cnct-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Transformer cores
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: RSG pictures
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Primary current and voltage effects
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• UK : potential transformers etc. in auction
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Transformer cores
  • From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: More on small caps (with a bang)
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Transformer cores
  • From: RODERICK MAXWELL <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Spec's on caps
  • From: "Dale, Martin" <martin.dale-at-ntu.ac.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Transformer cores
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• T&R pole pigs..
  • From: mel wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Gary Lau 09-Nov-1998 1252 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Charles Brush <cfbrush-at-interport-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: More on small caps (with a bang)
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Clay Wilson <gasman-at-althea.a-line-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Transformer cores
  • From: RODERICK MAXWELL <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Capacitor construction?
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why Not?
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Laser Triggered Spark Gap
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Beginners Tesla Coils
  • From: Steven Noorderbroek <digger-at-mail.austasia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spec's on caps
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: More on small caps (with a bang)
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Uk coilers going to pickets lock radio rally?
  • From: D Mills <ap7012-at-qmw.ac.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: "Benjamin W. Bouxsein" <bbouxse-at-comp.uark.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Nitrogen laser power level and gas mixture
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: T&R pole pigs..
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Envisioneering --- a Tesla research / product Mfg. Co.
  • From: DamDeName-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Tesla Inventors Expo 1998
  • From: Teslagold-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Rick Kirby <rkirby-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Uk coilers going to pickets lock radio rally?
  • From: "Dale, Martin" <martin.dale-at-ntu.ac.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: mel wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Uk coilers going to pickets lock radio rally?
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Envisioneering --- a Tesla research / product Mfg. Co.
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: "Matthew Shaffer" <dfive10-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why Not?
  • From: "R M Craven" <craven-at-globalnet.co.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Equa-drive system
  • From: dwight duncan <duncand-at-ccsalpha2.nrl.navy.mil> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Fwd: Equa-drive system
  • From: Esondrmn-at-aol-dot-com
• Re: Triggered Spark Gaps - Why Not?
  • From: Michael Veach <veachm-at-sunyit.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Uk coilers going to pickets lock radio rally?
  • From: Alan Sharp <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: capacitive or sat.reactor ballast?
  • From: "Mad Coiler" <tesla_coiler-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Jacob Roberto <jroberto-at-ieway-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Fwd: Equa-drive system
  • From: gweaver <gweaver-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Uk coilers going to pickets lock radio rally?
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• streamer hit
  • From: "Paul Marshall" <klugmann-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Anybody answering this? (Primary current and voltage effects)
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Jacob Roberto <jroberto-at-ieway-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Bylund Solid State Mag.
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why Not?
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why Not?
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Equations?
  • From: mel wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Determine va capacity.
  • From: Daniel Hess <dhess1-at-us.ibm-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: "Benjamin W. Bouxsein" <bbouxse-at-comp.uark.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why Not?
  • From: "Paul Marshall" <klugmann-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: potential transformers etc. in auction
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: streamer hit
  • From: mel wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Equa-drive system
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: mel wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Transformer cores
  • From: "Gregory R. Hunter" <ghunter-at-enterprise-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: streamer hit
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Charles Brush <cfbrush-at-interport-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Steve Rodway <Legion-at-bigfoot-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: "Bill Wysock" <wysock-at-ttr-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Equations?
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: ESchulz531-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Transformer cores
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: ajones-at-wavegate-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Transformer cores
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Triggered Spark Gaps - Why Not?
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• RE: Equa-drive system
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• VARIAC's
  • From: Gordon King <gking-at-impulse-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: T&R pole pigs..
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com>
• Variac info
  • From: Gordon King <gking-at-impulse-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Re: streamer hit
  • From: KRAMPF-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• First Coil Works --Tuning Help
  • From: "Adam Parker" <park_e_r-at-HiWAAY-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Equa-drive system
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Cheap 20nF 20kV pulse caps
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Equations?
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: T&R pole pigs..
  • From: Steve Rodway <Legion-at-bigfoot-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Better small-cap success.
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Anybody answering this? (Primary current and voltage effects)
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: T&R pole pigs..
  • From: Clay Wilson <gasman-at-althea.a-line-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• another ballast consideration
  • From: "Mad Coiler" <tesla_coiler-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's -> parallel??
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: streamer hit
  • From: gweaver <gweaver-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's
  • From: Jim Monte <JDM95003-at-UCONNVM.UCONN.EDU> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Free variacs
  • From: Gary Lau 12-Nov-1998 2222 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Cap Material?
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Bigger secondary = longer streamers? (was Re: Anybody answering this? (Primary current and voltage effects))
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Variac Pics
  • From: Gordon King <gking-at-impulse-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Stefan.Binder-at-t-online.de (Stefan Binder) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: "Paul Marshall" <klugmann-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: another ballast consideration
  • From: "Mike Magnus" <mike-at-gmx-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: T&R pole pigs..
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: streamer hit
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's -> parallel??
  • From: Steve Rodway <Legion-at-bigfoot-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Cap Material? -Reply
  • From: ROBERT CRESSLER <59CREROB-at-menasha-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Cap Material?
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Fu Manchu coil
  • From: Jonathan Bazemore <jpbazemo-at-ouray.cudenver.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: another ballast consideration
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Cap Material?
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Bigger secondary = longer streamers? (was Re: Anybody answering this? (Pr...
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: David Huffman <huffman-at-fnal.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's -> parallel??
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Cap Material?
  • From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• ComEd 'Excess Assets' Auction
  • From: "Mike Magnus" <mike-at-gmx-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: PSpice modeling of spark gaps
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Cap Material?
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Cheap 20nF 20kV pulse caps
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Fu Manchu coil
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Ok.. where am I going wrong
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• transformer rewind
  • From: "RON QUIRING" <ronrenee-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Inductance and cap. meters
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Help with Pig Training
  • From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: Steve Rodway <Legion-at-bigfoot-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• how to begin??
  • From: "marc boiy" <ON1DCV-at-mail.dma.be> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• vacum tubes
  • From: BAREN01-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Inductance and cap. meters
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Tube Coils
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: transformer rewind
  • From: ESchulz531-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Inductance and cap. meters
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Gluing core laminates?
  • From: Wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Current draw ?
  • From: Wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Current draw ?
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Why NST's are doomed...
  • From: Gary Lau 14-Nov-1998 2223 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ok.. where am I going wrong
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Magnifier action!
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: Mike Nolley <mnolley-at-mail.slc.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: how to begin??
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "mike" <mike-at-gmx-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: streamer hit
  • From: "Gregory R. Hunter" <ghunter-at-enterprise-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube Coils
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: vacum tubes
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Help with Pig Training
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube Coils
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube Coils
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Current draw ?
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Help with Pig Training
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: "Adam Parker" <park_e_r-at-hiwaay-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: info wanted
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: clara02-at-m8.sprynet-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Gluing core laminates?
  • From: "Adam Parker" <park_e_r-at-hiwaay-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: how to begin??
  • From: "Adam Parker" <park_e_r-at-hiwaay-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• parts list
  • From: BAREN01-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Primary Q - A Brain Teaser
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 300W 54" TC specs: My questions
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Gluing core laminates?
  • From: Steve Rodway <Legion-at-bigfoot-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Gap space measurements
  • From: "Adam Parker" <park_e_r-at-hiwaay-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Retuning with bigger cap?
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: streamer hit
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Help with Pig Training
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Beginner's Tesla coil -First Light!
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Beginners Tesla Coils
  • From: KRAMPF-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's -> parallel??
  • From: bob golding <yubba-at-clara-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: ElectronX-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• WinTesla 2.1.0 (fwd)
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• New Testing done and my 8" secondary
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• GM HEI Coil Autopsy
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Retuning with bigger cap?
  • From: ElectronX-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube Coils
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Spinning pipes
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ok.. where am I going wrong
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• spun aluminum
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• primary coil wire
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• info for beginners
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Not enough pimary inductance?
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Retuning with bigger cap?
  • From: Sam Laur <slaur-at-sekunda.pp.utu.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: how to begin??
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Retuning with bigger cap?
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Why NST's are doomed...
  • From: Gavin Hubbard <ghub005-at-xtra.co.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: GM HEI Coil Autopsy
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "Mike Magnus" <mike-at-gmx-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Beginners Tesla Coils
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ok.. where am I going wrong
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Gluing core laminates?
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Primary Q - A Brain Teaser
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Today's stuff
  • From: Gomez <gomez-at-netherworld-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Gap space measurements
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube Coils
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Gap space measurements
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: New Testing done and my 8" secondary
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: vacum tubes
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: primary coil wire
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube Coils
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: info for beginners
  • From: ElectronX-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: GM HEI Coil Autopsy
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: GM HEI Coil Autopsy
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Beginner coil thoughts
  • From: "FRITZ, TERRY" <terryf-at-ftc2.aei-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Retuning with bigger cap?
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube Coils
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Capacitor material
  • From: Bill Fuller <wfuller-at-home-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: primary coil wire
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Ignition coil measurements
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: info for beginners
  • From: gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Secondary coil forms
  • From: Bill Fuller <wfuller-at-home-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Tesla club list?
  • From: "Ross W. Overstreet" <ross-o-at-mindspring-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ignition coil measurements
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• steam spark gaps
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: My 8" secondary
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Electronic Work bench; better than priced bread
  • From: dwight duncan <duncand-at-ccsalpha2.nrl.navy.mil> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginners Tesla Coils
  • From: ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: primary coil wire
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Gluing core laminates?
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner coil thoughts
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First Coil Works --Tuning Help
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: VARIAC's -> parallel??
  • From: Jim Monte <JDM95003-at-UCONNVM.UCONN.EDU> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: My 8" secondary
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner coil thoughts
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• For Sale, small toroids, and now...copper
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Retuning with bigger cap?
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ok.. where am I going wrong
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ignition coil measurements
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ok.. where am I going wrong
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ignition coil measurements
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: My 8" secondary
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: Dave Bell <dbell-at-TheBells-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• welding elctrodes
  • From: "Kevin Wahila" <knw2-at-lehigh.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Pole Pigs
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Electronic Work bench; better than priced bread
  • From: ESchulz531-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: primary coil wire
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner coil thoughts
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: GM HEI Coil Autopsy
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Electronic Work bench; better than priced bread
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tesla club list?
  • From: ESchulz531-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: info for beginners
  • From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Retuning with bigger cap?
  • From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: GM HEI Coil Autopsy
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Terry's GM HEI Coil Update.
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: GM HEI Coil Autopsy
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: EWB; better than priced bread. Yes and a demo is for free
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ignition coil measurements
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: GM HEI Coil Autopsy
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ok.. where am I going wrong
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Electronic Work bench; better than priced bread
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ignition coil measurements
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ignition coil measurements
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Corrected Ignition coil measurements
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Pole Pigs
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• High power HVDC cap design.
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Need Help.
  • From: kc1-at-ime-dot-net (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: Daniel Hess <dhess1-at-us.ibm-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: Bill Fuller <wfuller-at-home-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ignition coil measurements
  • From: "Jim Lux" <jimlux-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: "Jim Lux" <jimlux-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: "Robert W. Stephens" <rwstephens-at-headwaters-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re Terry's GM HEI Coil
  • From: Gary Lau 18-Nov-1998 0843 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ok.. where (Calorimeter)
  • From: "Payne, Will E" <will.e.payne-at-lmco-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Beginner's coil safety
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Corrected Ignition coil measurements
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: GM HEI Coil Autopsy
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RF resistance of secondary coil
  • From: ElectronX-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Corrected Ignition coil measurements
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Coiler Question, conserning primary windings.
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: "D. E. Sharpe" <sccr4us-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Ignition coil measurements
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• iron coir equation
  • From: BAREN01-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Q - A Brain Teaser
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's coil safety
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• 803's in a Tesla Coil
  • From: "Benjamin W. Bouxsein" <bbouxse-at-comp.uark.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Massive Confusion.
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's coil safety
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Tube pinouts
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Coiler Question, concerning primary windings.
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• 801-A
  • From: Parpp807-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: welding elctrodes
  • From: "Edward J. Wingate" <ewing7-at-frontiernet-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: iron coir equation
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil
  • From: Gary Lau 19-Nov-1998 0857 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Unknown tube: 7943 = BT145A = TQ 2/3
  • From: Kristian Ukkonen <kukkonen-at-cc.hut.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: RF resistance of secondary coil
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Massive Confusion.
  • From: Steve Rodway <Legion-at-bigfoot-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 803's in a Tesla Coil
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Coiler Question, conserning primary windings.
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube pinouts
  • From: Kristian Ukkonen <kukkonen-at-cc.hut.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: RF resistance of secondary coil
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: tesla-d Digest V98 #580
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Brazing transformer
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's Tesla coil -First Light!
  • From: "L. Robertson" <LWRobertson-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: iron coir equation
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube pinouts
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Interesting bit of info on spark gaps and UV
  • From: bertpool-at-ticnet-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: RF resistance of secondary coil
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Ignition coil measurements
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Massive Confusion.
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Massive Confusion.
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Attn: Rich, Bert & Terry- Growing large arcs?
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Need Help.
  • From: "Gregory R. Hunter" <ghunter-at-enterprise-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's coil safety
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Spinning pipes
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Massive Confusion.
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Many spark gap tests !
  • From: "R.E.Burnett" <R.E.Burnett-at-newcastle.ac.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: UK coilers going to pickets lock radio rally?
  • From: bob golding <yubba-at-clara-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's coil safety
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Coiler Question, conserning primary windings.
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Tube pinouts
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: 803's in a Tesla Coil
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: iron coir equation
  • From: BAREN01-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• TC Secondary Terminal Design
  • From: "John H. Couture" <couturejh-at-worldnet.att-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Low voltage sparkgaps for ignition coil driver...
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Beginner's coil safety
  • From: Gavin Hubbard <ghub005-at-xtra.co.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Hi Tech Ignition Stuff
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Test message (fwd)
  • From: Tesla List <mod1-at-pupman-dot-com>
• Test message two (fwd)
  • From: Tesla List <mod1-at-pupman-dot-com>
• ATTENTION Aussie coliers
  • From: Marcus Young <MEYoung-at-uq-dot-net.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Massive Confusion.
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: ntesla-at-ntesla.csd.sc.edu (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: UK coilers going to pickets lock radio rally?
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re. Many spark gap tests !
  • From: Gary Lau 20-Nov-1998 1159 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Cauterodyne / Tesla Coil
  • From: "Ross W. Overstreet" <ross-o-at-mindspring-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: iron coir equation
  • From: "Bill the arcstarter" <arcstarter-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• re: Interesting bit of info on spark gaps and UV
  • From: "Bill the arcstarter" <arcstarter-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• A baby coiler is born!!
  • From: gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: iron coir equation
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Re. Many spark gap tests !
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: TC Secondary Terminal Design
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• wether or not to mess with repotting NSTs
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Cap question
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: iron coir equation
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Massive Confusion.
  • From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Magnifier Questions
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: UK coilers going to pickets lock radio rally?
  • From: Alan Sharp <AlanSharp-at-compuserve-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: TC Secondary Terminal Design
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• No Subject
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Primary Flashover
  • From: RODERICK MAXWELL <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms and winding jigs
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Current limiting
  • From: mel wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Java TC Calculator - JTCC
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• <ADMIN> List mailing schedule
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Wood
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Hello UK Coilers
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Flashover
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• UV sources for a triggered gap?
  • From: "Bill the arcstarter" <arcstarter-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Sparkplug Coils to Replace the Neon Sign Transformer..
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• The Equa-Drive System
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Flashover
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Wood
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Flashover
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: wether or not to mess with repotting NSTs
  • From: gojiro-at-juno-dot-com (Alexander Roston) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Secondary coil forms and winding jigs
  • From: David Sharpe <sccr4us-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: wether or not to mess with repotting NSTs
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Current limiting
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re. Cap question
  • From: Gary Lau 22-Nov-1998 1511 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: TC Secondary Terminal Design
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Coiler Question, conserning primary windings.
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Off-axis primary inductance
  • From: Gary Lau 22-Nov-1998 1518 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Not enough pimary inductance?
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: TC Secondary Terminal Design
  • From: John Couture <COUTUREJH-at-worldnet.att-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re. wether or not to mess with repotting NSTs
  • From: Gary Lau 22-Nov-1998 1534 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: TC Secondary Terminal Design
  • From: John Couture <COUTUREJH-at-worldnet.att-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Need Help.
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• GM HEI coil...
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: wether or not to mess with repotting NSTs
  • From: NeonGlow-at-webtv-dot-net (Tony Greer)
• Re: Primary Flashover
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: RF resistance of secondary coil
  • From: ElectronX-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• magnifier
  • From: "James Haycraft" <jhaycraft-at-nwfl-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Fw: Terry's GM HEI Coil Update
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Small coil of Richard Hull's
  • From: Matthew Mills <Matthew.Mills-at-santos-dot-com.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Current limiting
  • From: Mike Nolley <mnolley-at-mail.slc.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• High Voltage Rectifiers.
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Top tubes.
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Interesting bit of info on spark gaps and UV
  • From: "Gregory R. Hunter" <ghunter-at-enterprise-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Caps for sale (forwarded by non-list person)
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• IMPORTANT: RESEARCH ON WHAT?
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Using neons for limiting?
  • From: Wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Secondary coil form material?
  • From: Larry Fennigkoh <nnttnn-at-mixcom-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Small coil of Richard Hull's
  • From: "Guy Wilson" <wilson-at-vossnet.de> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• WW article
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: "Sam Barros" <sambarros-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Secondary coil forms and winding jigs
  • From: "CompWiz" <compwiz-at-stratos-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Cameron Cauterodyne
  • From: "Bill the arcstarter" <arcstarter-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Winding jigs: How I built mine
  • From: RWB355-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Wood
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: "Robert W. Stephens" <rwstephens-at-headwaters-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Wood
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• FIRST LIGHT!
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: ElectronX-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Area-31 Testing Range
  • From: "Robert W. Stephens" <rwstephens-at-headwaters-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Resistive Ballast Success
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• For Sale: Variacs, NSTs, 155 KV Rectifiers, Spectrum Tubes, HV Caps, Meters
  • From: Tedd Payne <teddp-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: "James" <elgersmad-at-email.msn-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Moderator note - (Low voltage sparkgaps for...)
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• New images from R.W. Stephens
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: TC Secondary Terminal Design
  • From: John Couture <COUTUREJH-at-worldnet.att-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• X-Ray HT power supply
  • From: Gavin Hubbard <ghub005-at-xtra.co.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: IMPORTANT: RESEARCH ON WHAT?
  • From: Sulaiman Abdullah <sulaiman-at-lityan-dot-com.my> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Using neons for limiting?
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Attn: Rich, Bert & Terry- Growing large arcs?
  • From: Bert Hickman <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: FIRST LIGHT!
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Massive Confusion.
  • From: Esondrmn-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Interesting bit of info on spark gaps and UV
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: Using neons for limiting?
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re. IMPORTANT: RESEARCH ON WHAT?
  • From: Gary Lau 24-Nov-1998 1057 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Low voltage sparkgaps for ignition coil driver...
  • From: Jim Lux <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Terry's GM HEI Coil Update.
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: The Equa-Drive System
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• FIRST LIGHT II
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Variac for sale
  • From: "Brad McPeak" <bmcpeak-at-gte-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Small coil of Richard Hull's
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• search for a neon sign distributor in your area
  • From: "chris morgan" <crmorgan-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: X-Ray HT power supply
  • From: "Wysock, William C." <Wysock-at-courier8.aero-dot-org> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: X-Ray HT power supply
  • From: "Bill the arcstarter" <arcstarter-at-hotmail-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Flyback Coil system
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: FIRST LIGHT!
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Attn: Rich, Bert & Terry- Growing large arcs?
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Interesting bit of info on spark gaps and UV
  • From: Greg Leyh <lod-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Mica Caps for Tube coils
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Area-31 under scrutiny?
  • From: "Robert W. Stephens" <rwstephens-at-headwaters-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Wound secondarys
  • From: Phililp Mac Duffie <shadow42-at-totcon-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Primary Flashover
  • From: Roderick Maxwell <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Cliff Fahrer <cfahrer-at-In-Touch-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• <ADMIN, please read> List changes
  • From: Chip Atkinson <chip-at-pupman-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Interesting bit of info on spark gaps and UV
  • From: wwl-at-netcomuk.co.uk (Mike Harrison) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Article by Malcolm Watts
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Wound secondarys
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: wether or not to mess with repotting NSTs
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Using neons for limiting?
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: alfred.skrocki.sr-at-juno-dot-com (Alfred A Skrocki) (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Growing large arcs
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Moderator's note
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Scott Stephens <Scott2-at-mediaone-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: John Couture <COUTUREJH-at-worldnet.att-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Test message, please ignore (fwd)
  • From: Tesla List <mod1-at-pupman-dot-com>
• Re: X-Ray HT power supply
  • From: Bryan Work <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Bryan Work <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: X-Ray HT power supply
  • From: Ed Phillips <evp-at-pacbell-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RESEARCH AT HUT
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Concerning a Potential Transformer.
  • From: mel wise <mwise44-at-flash-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Flyback Coil system
  • From: Keith Garvin <keithg-at-datalight-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Wound secondarys
  • From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• First coil - questions
  • From: Keith Garvin <keithg-at-datalight-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: IMPORTANT: RESEARCH ON WHAT/ follow up
  • From: "Dr. John W. Gudenas" <jgudenas-at-admin.aurora.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Flyback Coil system
  • From: David Sharpe <sccr4us-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Unknown tube: 7943 = BT145A = TQ 2/3
  • From: Kristian Ukkonen <kukkonen-at-cc.hut.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• WW Article
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: X-Ray HT power supply
  • From: Cabbott Sanders <cabbott-at-cyberis-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: "rwall" <rwall-at-gateway-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Introduction
  • From: Finn Hammer <f-hammer-at-post5.tele.dk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: RESEARCH AT HUT
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: IMPORTANT: RESEARCH ON WHAT/ follow up
  • From: "Marco Denicolai"<Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Concerning a Potential Transformer.
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Coil Winder
  • From: David Sharpe <sccr4us-at-erols-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Wavetek 27XT Sale
  • From: "Steve Young" <youngs-at-konnections-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: ElectronX-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Concerning a Potential Transformer.
  • From: "Doug Brunner" <dabrunner-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First coil - questions
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• RE: First coil - questions
  • From: "Coiler" <mycroft-at-access1-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: RESEARCH AT HUT
  • From: Bryan Work <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: X-Ray HT power supply
  • From: Bryan Work <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Introduction
  • From: "Barton B. Anderson" <mopar-at-uswest-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: First coil - questions
  • From: "Shannon Garvin" <keithg-at-datalight-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Off-axis primary inductance
  • From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Richard Hull <rhull-at-richmond.infi-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Tesla Coil on TV Science Show.
  • From: gweaver <gweaver-at-earthlink-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: Terry Fritz <terryf-at-verinet-dot-com>
• Re: Off-axis primary inductance
  • From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Controling a Pole Pig
  • From: "Vivian Watts" <V.C.Watts-at-btinternet-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re Wavetek 27XT Sale
  • From: Gary Lau 29-Nov-1998 1146 <lau-at-hdecad.ENET.dec-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: Wavetek 27XT Sale
  • From: "rwall" <rwall-at-gateway-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: X-Ray HT power supply
  • From: Bryan Kaufman <bryan-at-apexrad-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Re: IMPORTANT: RESEARCH ON WHAT?
  • From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• IMPORTANT: RESEARCH ON WHAT?
  • From: Gary Johnson <gjohnson-at-ksu.edu> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• new member ??
  • From: "Shane and Tammy Rusch" <str-at-itol-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)