Re: Massive Confusion.

• To: tesla-at-pupman-dot-com
• Subject: Re: Massive Confusion.
• From: Mark Finnis <mefinnis-at-medicine.adelaide.edu.au> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Sat, 21 Nov 1998 16:18:58 -0700
• Approved: terryf-at-verinet-dot-com

At 23:27 20/11/98 -0700, Ed wrote:

> I have since
> switched to a variac for ballast as the pole transformer was causing some 60
> hz resonance with the tank circuit and blowing up my caps.
> 
> At 5kva, the transformer would draw approximately 21 amps.  I have had my
> primary current up as high at 40 amps (close to 10 kva) and typically run at
> 30 to 35 amps and the transformer does not even get warm.
> 
> Ed Sonderman
>  >>
>Correction - the above should read "the welder was causing some 60 hz
>resonance"

This will seem a really dumb question, but how did you know the welder was
causing resonance?

Thanks,



Mark

http://www.cobweb-dot-com.au/~dkfinnis

• Prev: Re: iron coir equation
• Next: Re: Magnifier Questions
• Index(es):
  • Main
  • Thread