[Prev][Next][Index][Thread]

WinTesla 2.1.0 (fwd)



Greetings,

I recieved this and felt that it was of interest to the general list.

Chip

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 Chip Atkinson 
 http://www.pupman-dot-com 
 --- If I can't fix it, I can fix it so it can't be fixed --
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

---------- Forwarded message ----------
Date: Sun, 15 Nov 1998 20:34:34 -0700 (MST)
From: Tesla List Owner <listown-at-pupman-dot-com>
To: Chip Atkinson <chip-at-pupman-dot-com>
Subject: WinTesla 2.1.0 (fwd)



---------- Forwarded message ----------
Date: Sun, 15 Nov 1998 13:58:29 -0700
From: Rscopper-at-aol-dot-com
To: tesla-at-pupman-dot-com
Subject: WinTesla 2.1.0

WinTesla 2.1.0 is ready for download at:
http://members.aol-dot-com/rscopper/index.htm

New features include "Scratch Pad" for adding misc. comments (can be cut and
pasted to Notepad or whatever - not saved with file). The help section now
shows most of the formulas WinTesla uses.  Added PFC_Rating from 0 to 100
percent to scale recommended value.

Comments/suggestions should be directed to rscopper-at-aol-dot-com since I am not
receiving tesla list mail at the present time.

I've given up trying to re-write WinTesla in MFC Visual C++, and have gone to
Borland Delphi 4 for future upgrades.

I am working on an interface to PSpice 8.0 for WinTesla 2.2, any input for
models would be appreciated.

Happy coiling,

R. (Scott) Coppersmith