Re: [TCML] Let's try this again... - was: [TCML] MMC pics

["Nicholas J. Goble" <ngoble@xxxxxxx>]

Today I made a new MMC.  I took apart the old one and straightened all 
the leads the best I could.  I then found an unused cutting board (it's 
blue, I hope that doesn't matter) in my kitchen and used it to mount 
the caps.  I drilled holes in the board and cut it lengthwise to make 
two long, narrow boards (it's tough to cut the plastic with a jigsaw; 
it melts behind the blade).  I used too much solder than I wanted to, 
the leads weren't clean.

I made two boards of six caps.  The caps are in series with the 
resistors parallel.  Pictures submitted for approval.

http://www.flickr.com/photos/28523883@N06/2662861930/in/photostream/
http://www.flickr.com/photos/28523883@N06/2662862400/

What do you think?  Are they Tesla worthy??

Nicholas Goble
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla