Re: [TCML] Best GDT core for the mini SSTC

["Bart B. Anderson" <bartb@xxxxxxxxxxxxxxxx>]

With the Cat-5 wire, turns, and mounting, it was a prefect size.
http://www.classictesla.com/temp/GDT_B64290L0659X037.jpg

Bart

On 11/30/2012 10:40 AM, Atomic wrote:
> Why did you get a larger size, Bart?
>
> Thanks!
>
> On Fri, Nov 30, 2012 at 3:34 PM, Bart B. Anderson <bartb@xxxxxxxxxxxxxxxx>wrote:
>
> > I would stick with the higher AL and permeability values myself. The one I
> > used was from mouser, a bit more expensive, but worked fine.
> > http://www.mouser.com/Search/**ProductDetail.aspx?R=**
> > B64290L0659X037virtualkey59250**000virtualkey871-**B64290L0659X037<http://www.mouser.com/Search/ProductDetail.aspx?R=B64290L0659X037virtualkey59250000virtualkey871-B64290L0659X037>
> >
> > Material is T37, AL=9800 ą25%, u=6000
> >
> > I sought out this one due to a couple attempts winding with poor choices.
> > Winding GDT's (or even CT's) is something you don't want to do once.
> >
> > Take care,
> > Bart

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla