[TCML] litz wire

[Jim Lux <jimlux@xxxxxxxxxxxxx>]

Starting a new thread here..


How you wind litz wire without braiding.  one way is to twist clumps 
that are themselves twisted.  Consider taking 4 wires and twisting them. 
 Then take 4 clumps and twist those.  Each wire will spend the same 
distance on the outside of the clump.

It gets tricky, though.. if you use 6 or 7 wires, then one inevitably 
winds up in the middle and stays there, so you an use a core to wrap 
around.  Or, stick with quads.

The problem is, I think, that you can't continue this strategy.  That 
is, the 4 of 4 scheme can't be extended, can it?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla