[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Transformer cores
Just my 2 cents:
I solved the problem by putting threaded rod terminals on the lid
of my transformer case. This way I can enjoy the flexibility of stranded
wire without the oil making its way outside the container.
regards
Christoph Bohr
> Mike,
>
> I too have a 6 MOT, 3 transformer oil filled ammo can power supply. Just a
> note of caution and amazement: If you use regular three conductor stranded
> wire power cord to go below the oil to connect to the primaries, you may
> find as I did that the oil wicks it way through many feet of power cord and
> can make a mess at the other end of it! Best to use solid enamel insulated
> wire for the part that is immersed in oil.
>
> --Steve Y.
> <SNIP>
> I just finished building my 6MOT power supply , I am very happy with the
> results ,the mots are in pairs and placed in 3 .50 cal ammo boxes and
> filled with oil , thanks to everyone on the list for the info on MOT stacks
> , the archives have been extremely helpful. hope to have some pictures one
> day
>
> Thanks again
> Mike
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla