[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] phillips question about wax and more
---- Original Message -----
From: "bartb" <bartb@xxxxxxxxxxxxxxxx>
I agree that oils will penetrate the outer windings a little better, but
this doesn't mean that coilers should not use wax. Wax has it's benefits
and it's cheap, readily available, and a nice strong hold for the core
wihtin the case. I see wax as ideal for an NST repotting compound.
One thing I would like to mention, having repotted my two NSTs in wax (a
12/60 and a 15/60), is that wax contracts when it cools, and by a
significant amount. The way that I compensated for this was to wait until
the wax had started to set up, maybe a 1/4" solid on the surface, and then I
poked a series of holes with a small dowel through the top. This allowed
for a controlled contraction, air between the top hardened layer and the
still molten layer, instead of pulling away from the windings internally.
Of course, make sure you don't do any damage when you're poking the dowel
down into the guts.
This required another pour (to fill the holes), and I repeated the procedure
a couple of times until I was satisfied that the shrinkage had been
compensated for.
Jon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla