[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] phillips question about wax and more
Don't remove the coils at all. Just unpot, reconnect to silicone GTO wire,
and drop it into a Walmart tub filled with xmfr oil.
No, don't use wax. Unless you vacuum impregnate the wax into the windings
you will have a failure.
Dr. Resonance
On Sun, Jun 8, 2008 at 12:33 PM, douglas smith <eyemfedup2@xxxxxxxxx> wrote:
> i also wondered if you could re-pot in wax
> also I'm having real bad luck removing coils inside seems i keep breaking
> secondary windings not to the terminals but when i remove coils i have
> fine exposed wires also cant see were the connect to
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla