[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] secondary scrape
Will spray varnish wok just as well? So far, I've emptied a whole can of
acrylic spray varnish on the repair.
John
On Sat, Aug 2, 2008 at 11:14 AM, Bert Hickman <bert.hickman@xxxxxxxxxx>wrote:
> Hi John,
>
> As long as you didn't break any wires or cause them to overlap, you should
> be able to easily repair the damage. Carefully brush the winding with a
> clean paintbrush in the same direction as the winding to remove any copper
> particles that may be lodged between adjacent wires. Then carefully coat the
> damaged region with some corona dope or a couple of coatings of clear
> polyurethane varnish. Your winding should be as good as new!
>
> Bert
> --
> ***************************************************
> We specialize in UNIQUE items! Coins shrunk by huge
> magnetic fields, Lichtenberg Figures (our "Captured
> Lightning") and out of print technical Books. Visit
> Stoneridge Engineering at http://www.teslamania.com
> ***************************************************
>
> John Matok wrote:
>
>> While filing my secondary to make it level, I accidentally scraped the
>> file
>> across about 2" of the wire. I think the form is okay, but I can see
>> some
>> bare wire where the enamel was scraped off. What should I do? I'm pretty
>> concerned.
>> John Matok
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla