[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] secondary scrape



Hi John,

As long as you didn't break any wires or cause them to overlap, you should be able to easily repair the damage. Carefully brush the winding with a clean paintbrush in the same direction as the winding to remove any copper particles that may be lodged between adjacent wires. Then carefully coat the damaged region with some corona dope or a couple of coatings of clear polyurethane varnish. Your winding should be as good as new!

Bert
--
***************************************************
We specialize in UNIQUE items! Coins shrunk by huge
magnetic fields, Lichtenberg Figures (our "Captured
Lightning") and out of print technical Books. Visit
Stoneridge Engineering at http://www.teslamania.com
***************************************************

John Matok wrote:
While filing my secondary to make it level, I accidentally scraped the file
across about 2" of the wire.  I think  the form is okay, but I can see some
bare wire where the enamel was scraped off.  What should I do?  I'm pretty
concerned.
John Matok
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla