[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] secondary scrape
Try to fix it. What have you got to lose? A couple of coats of acrylic or polyurethane varnish may be all it needs.
I once rehabilitated a filthy, pitted, peeling piece of crap secondary. I removed loose flakes of peeling varnish, cleaned it with isopropyl alcohol, then applied two or three coats of oil-based, polyurethane clear spar varnish. The reconditioned secondary looks and works fine. I'm glad I didn't needlessly throw it away.
Greg
--- On Fri, 8/1/08, John Matok <jmatoknoon@xxxxxxxxx> wrote:
> From: John Matok <jmatoknoon@xxxxxxxxx>
> Subject: [TCML] secondary scrape
> To: tesla@xxxxxxxxxx
> Date: Friday, August 1, 2008, 10:38 PM
> While filing my secondary to make it level, I accidentally
> scraped the file
> across about 2" of the wire. I think the form is
> okay, but I can see some
> bare wire where the enamel was scraped off. What should I
> do? I'm pretty
> concerned.
> John Matok
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla