[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Large top loads

To: tesla@xxxxxxxxxx
Subject: Re: Large top loads
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 23 Oct 2006 07:47:03 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Mon, 23 Oct 2006 07:47:18 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <ZRITPgIXRAD.A.86C.mfMPFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "resonance" <resonance@xxxxxxxxxxxx>

I used vers. 10 on my recent MOSFET SSTC design. It's very accurateand helpful especially when setting up the pri configuration for anoptimum coeff. of coupling without getting into the racing sparksarea, ie, k values exceeding 0.2. The 0.18 to 0.2 range providesoptimum performance from almost all coil setups whether flat spiralor solenoid type pri.


Bart's to be congratulated on a job "very well done" with his program.

Dr. Resonance




Rather than use Java 9.1, I would highly
recommend Javatc 10.m which is currently up at

the website.

Prev by Date: Re: Wound my first secondary!
Next by Date: Re: Coil behavior
Previous by thread: Re: Large top loads
Next by thread: Re: Gazing Ball Terminal Mounting
Index(es):
- Date
- Thread