[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Safety Gap - Setting

To: tesla@xxxxxxxxxx
Subject: Re: Safety Gap - Setting
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Fri, 12 May 2006 16:15:07 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Fri, 12 May 2006 16:02:57 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <WT04lzPlNnI.A.EeC.RYQZEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "A" <striker754@xxxxxxxxxxxxx>

Yes because you want the max situation.

----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, May 12, 2006 12:01 PM
Subject: Safety Gap - Setting

Original poster: otmaskin5@xxxxxxx
In adjusting safety gaps so that they just not fire for a given NST,I assume you do this with the variac turned all the way up. I thinkthis is right, but would appreciate some feedback to confirm I'mdoing it right or let me know if this is wrong. Thanks. Dennis Hopkinton MA

Prev by Date: What MMC Capacitors for a 4 MOT stack?
Next by Date: Re: NST Depotting Experience +
Previous by thread: Safety Gap - Setting
Next by thread: Re: Safety Gap - Setting
Index(es):
- Date
- Thread