[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Safety Gap - Setting

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

Yes,  also set the safety gap with no load.  The TC should be disconnected.

Gerry R.

Original poster: otmaskin5@xxxxxxx
In adjusting safety gaps so that they just not fire for a given NST, I assume you do this with the variac turned all the way up. I think this is right, but would appreciate some feedback to confirm I'm doing it right or let me know if this is wrong. Thanks. Dennis Hopkinton MA