[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Safety Gap - Setting

To: tesla@xxxxxxxxxx
Subject: Safety Gap - Setting
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Fri, 12 May 2006 12:01:11 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Fri, 12 May 2006 11:48:56 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <7npBlFtOsIJ.A.XOF.IqMZEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: otmaskin5@xxxxxxxIn adjusting safety gaps so that they just not fire for a given NST,I assume you do this with the variac turned all the way up. I thinkthis is right, but would appreciate some feedback to confirm I'mdoing it right or let me know if this is wrong. Thanks. Dennis Hopkinton MA

Prev by Date: RE: New Baby!!! SISG!! 2:52PM (MST) weighing in at 0.78 Oz / 900Volts at 800 Amps!!!!!!
Next by Date: RE: BLOWER GAP EXPERIMENT
Previous by thread: Re: New Baby!!! SISG!! 2:52PM (MST) weighing in at 0.78 Oz / 900Volts at 800 Amps!!!!!!
Next by thread: Re: Safety Gap - Setting
Index(es):
- Date
- Thread