[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: question on rf ground (fwd)



Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Wed, 20 Dec 2006 12:25:16 -0800
From: Ed Phillips <evp@xxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: question on rf ground (fwd)

What is the difference between running a coil with a good rf ground and running it with the bottom of the econdary hooked to a probe I can draw like 20 inch arcs with the rf ground close to the toroid but only about six -10 inches with it grounded. i am puzzled by this and would like a little info thanks."

	Incorrectly tuned primary?

Ed