Re: 1 phase distribution transformer

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Mike" <mike.marcum@xxxxxxxxxxxx>

Well, you can always ballast it to lower kVA's, tho that's a waste of 
extra transformer. Probably weighs over 250 Kg. I'd get a smaller one 
if I could. I've ran a 3 kVA (16.8 kV, weighed about 100 Kg) to 7 for 
3-5 min with the case just getting warm.

Mike
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, September 25, 2005 11:38 AM
Subject: Re: 1 phase distribution transformer


> Original poster: Ed Phillips <evp@xxxxxxxxxxx>
>
> ">Hello all,
> >
> >I can buy a new 30 kVA 1 phase 22 kV- 460/230 V transformers for 500
> >Euro (directly from the factory) and was wondering this can be used
> >for Tesla coiling? Don't I need a 2 phase?
>
> Nope.. that's exactly what you need."
>
> IF you have a big enough power system.
>
> Ed