[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Terry's DRSSTC

To: tesla@xxxxxxxxxx
Subject: Re: Terry's DRSSTC
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Thu, 24 Mar 2005 18:27:16 -0700
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
In-reply-to: <00c901c530d6$cd81d620$657ba8c0@PAUL>
Old-return-path: <teslalist@twfpowerelectronics.com>
References: <6.0.3.0.2.20050322205027.0260b148@twfpowerelectronics.com> <00c901c530d6$cd81d620$657ba8c0@PAUL>
Resent-date: Thu, 24 Mar 2005 18:28:05 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <sT3qBB.A.PKG.kk2QCB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Terry Fritz <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>

Hi Paul,

I just lay a length of #12 house wire on top of the toroid and that will be fine. At 300kV, a little air gap is no problem at all ;-))

http://hot-streamer.com/temp/arcpoint.JPG

Cheers,

        Terry

At 06:05 PM 3/24/2005, you wrote:

Terry, I've been meaning to ask, is it OK to just lay a piece of copper pipe on top of the toroid sticking out to the side a little to provide a "jumping off point?" Or, does this require a more substantial connection to the toroid? Thanks. Paul Brodie

References:
- Terry's DRSSTC
  - From: Tesla list

Prev by Date: Re: Terry's DRSSTC
Next by Date: I have some extra IGBTs
Previous by thread: Terry's DRSSTC
Next by thread: Re: Terry's DRSSTC
Index(es):
- Date
- Thread