[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: component spacing for HV
- To: tesla@xxxxxxxxxx
- Subject: Re: component spacing for HV
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 18 Aug 2005 12:43:53 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Thu, 18 Aug 2005 12:49:14 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <tSPCEC.A.CLH.ngNBDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Matthew Smith <msmiffy@xxxxxxxxx>
Hi Justin
> Of course there is the risk of drawing an arc if the diodes
> are too close to one another, but are there any other factors
> that I should be considering?
You can always drop the board in oil to improve insulation; unlike
potting, this still leaves it repairable and has the added benefit of
providing a spot of cooling.
Cheers
M
--
Matthew Smith
<http://www.mss.cx/blog>