[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Rotary SG Safety

Original poster: Zimtesla-at-aol-dot-com 

In a message dated 6/13/04 11:10:52 AM Pacific Standard Time, 
tesla-at-pupman-dot-com writes:


>Lexan is rather flexible so 1/8" is rather thin for a rotor.  Whenever
>I use Lexan, I use 3/8" thick Lexan.


John,
this was a very small ASRG to be mounted under a small coil. The 1/8" Lexan 
did turn out to be too thin for this application. Thanks for your comments.
Jim