Re: phase conversion

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 

But your scheme won't generate phases that are 120 degrees apart.  They're
all still in phase.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, March 30, 2004 4:15 PM
Subject: RE: phase conversion


 > Original poster: "Christopher 'CajunCoiler' Mayeux" <cajuncoiler-at-cox-dot-net>
 >
 > I did such a configuration as class project,
 > one year.   The scale was small, but it did
 > the trick.  It was essentially a pole-pig
 > simulator, so that the new guys could try
 > their hand at delta, open-delta, and wye
 > secondary connections, without endangering
 > some very expensive REAL pigs.
 >
 > The transformers in the simulator were
 > 100VA isolation units, but it shouldn't be
 > TOO much different on a larger scale.
 >
 > Here's the way I wired them...
 > http://www.msbdatasystems-dot-com/sim_Y.jpg
 > http://www.msbdatasystems-dot-com/sim_D.jpg
 >