RE: phase conversion

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Malcolm Watts" <m.j.watts-at-massey.ac.nz> 

On 30 Mar 2004, at 17:15, Tesla list wrote:

 > Original poster: "Christopher 'CajunCoiler' Mayeux"
 > <cajuncoiler-at-cox-dot-net>
 >
 > I did such a configuration as class project,
 > one year.   The scale was small, but it did
 > the trick.  It was essentially a pole-pig
 > simulator, so that the new guys could try
 > their hand at delta, open-delta, and wye
 > secondary connections, without endangering
 > some very expensive REAL pigs.
 >
 > The transformers in the simulator were
 > 100VA isolation units, but it shouldn't be
 > TOO much different on a larger scale.
 >
 > Here's the way I wired them...
 > http://www.msbdatasystems-dot-com/sim_Y.jpg
 > http://www.msbdatasystems-dot-com/sim_D.jpg

As far as I can see, there is no phase difference between the
outputs. Am I missing something??

Malcolm