[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: phase conversion
Original poster: "Virtualgod" <mike.marcum-at-zoomtown-dot-com>
Might try finding a 400hz version. Usually less than half the weight (maybe
even 1/4) for the same kW rating.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, March 30, 2004 8:53 PM
Subject: RE: phase conversion
> Original poster: "David Thomson" <dave-at-volantis-dot-org>
>
> Hi Matt,
>
> I've been talking to experts concerning three-phase power for some time.
> The only way to get true three-phase power is to either buy it from the
> utility company (and learn to continually balance the lines) or generate
it
> yourself with a true three-phase generator.
>
> Phase converters allow you to run a three-phase motor using two of the
three
> phases. In all cases, you end up with a silent leg (some call it a
phantom
> leg, it's all the same). If all you want to do is run a three-phase
motor,
> that's fine, a phase converter will work.
>
> I've been wanting to generate true three-phase power so I could produce a
> rotating magnetic field from a stator without a rotor. I still haven't
> succeeded because I can't afford the expensive three-phase power from the
> utility company or the expensive three-phase generators.
>
> Well, I actually purchased three working 100kV three-phase generators from
> the military for $25 at a military auction. But the generators were so
huge
> I needed a flat bed semi to haul them and a pretty hefty forklift to move
> them. I ended up abandoning them.
>
> Dave
>
> > -----Original Message-----
> > From: Tesla list [mailto:tesla-at-pupman-dot-com]
> > Sent: Tuesday, March 30, 2004 12:18 PM
> > To: tesla-at-pupman-dot-com
> > Subject: phase conversion
> >
> >
> > Original poster: Matt <fox-at-woozle-dot-org>
> >
> > I seem to remember a post some time about being able to get three pahse
> > power from single phase power by wiring up 3 or 4 transformers in some
> > fashion. I have looked high and low but can not seem to find it. maybe
i'm
> > just out of my mind? can someone please point me in the correct
direction?
> >
> > -matt
> >
>
>