[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: suitable bleeder resistors for MMC



Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "Shaun Epp by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<scepp-at-mts-dot-net>
> 
> > ---SNIP---
> > I'm using 10 MegOhm 1/2W metal film resistors manufactured by
> > Philips. These are rated for 2.5kV if I remember rightly. I'm
> > impressing 1.5kV max across them. They are available from RS
> > Components.
> 
> Are you saying Radio Shack has good resistors??
> 
> Shaun Epp
> 
> > Regards,
> > Malcolm
> >

	2.5 kV rating???

ED