[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: suitable bleeder resistors for MMC

To: tesla-at-pupman-dot-com
Subject: Re: suitable bleeder resistors for MMC
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 26 Feb 2002 07:50:25 -0700
Resent-Date: Tue, 26 Feb 2002 07:57:08 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <-zqGQD.A.GgE.0I6e8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Shaun Epp by way of Terry Fritz <twftesla-at-qwest-dot-net>" <scepp-at-mts-dot-net>

> ---SNIP---
> I'm using 10 MegOhm 1/2W metal film resistors manufactured by 
> Philips. These are rated for 2.5kV if I remember rightly. I'm 
> impressing 1.5kV max across them. They are available from RS 
> Components.

Are you saying Radio Shack has good resistors??

Shaun Epp


> Regards,
> Malcolm
>

Prev by Date: Re: ~Can someone help...
Next by Date: Re: ~Can someone help...
Prev by thread: Re: suitable bleeder resistors for MMC
Next by thread: Re: suitable bleeder resistors for MMC
Index(es):
- Date
- Thread