Re: flat coil ?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Chris Swinson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <exxos-at-cps-games.co.uk>


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, April 28, 2002 9:28 PM
Subject: Re: flat coil ?


> Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jimlux-at-earthlink-dot-net>
>
>
> > Original poster: "Chris Swinson by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <exxos-at-cps-games.co.uk>
> >
> >> > Congrats on getting the coil wound! If you get the chance, it would
be
> > good
> > > for us to know the bare
> > > wire diameter. You mentioned 1.6mm (is that the bare wire diameter?).
> > Also,
> >
> > Thats a good question! It just says 1.6mm on the reel.  I tried to
mesure
> > with a ruler and it looks more like 1.8 though you can't trust that.
AFAIK
> > its 1.6mm dia.
>
> Perhaps the copper diameter is 1.6mm and there is a 0.1 mm thick
insulation
> layer, making the total OD 1.8mm?
>

I will try to get it measured with the correct tools, I will get back to
everyone with this as soon as I can find out.

Chris