[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: flat coil ?



Original poster: "Barton B. Anderson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla123-at-pacbell-dot-net>

Hi Paul, Chris, 

Tesla list wrote: 
>
> Original poster: "Chris Swinson by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <exxos-at-cps-games.co.uk> 
>
> > To sum your coil measurements: 
> > Outer Diam. = 45" 
> > Inner Diam. = 2" 
> > Wire Diam. = 0.063" 
> > Turns = 316 
> > Inductance = 44mH 
>
> Yes that is about it I think, R was 5.2R as I posted a little while ago.

I goofed on my last run of Acmi (I used the bare wire diam. instead of the
radius = my fault). 
Acmi shows (when run correctly) L = 43.44mH, R = 5.08 ohms. 
So that's good. Sorry about that. 

Take care, 
Bart