Re: Analog Panel Meter

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

I'm not too sure if their prices are high or low, but they carry everything,
understand what they sell and will help you make a good decision if you have
questions. I'd order from this place again without hesitation. I ordered
some Simpson AC voltage and current meters and a current transformer.

http://www.meterdistributor-dot-com/

KEN

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, April 23, 2002 9:08 AM
Subject: Analog Panel Meter


> Original poster: "David Sharpe by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<sccr4us-at-erols-dot-com>
>
> I need a large 0-20VDC panel meter, at least 4" x 6" for
> my wattmeter in my controller.  Any vendors or URL's that
> have meter movements at a reasonable price?  I have a
> commerical wattmeter transducer (Ohio Semitronics PC5),
> that is 300VAC -at- 5A input and 4-20mA output, so I will
> have to built a scaling amplifier with offset to convert to
> 0-12V, and a 60:5 CT to scale line currents to drive meter.
>
> Any help appreciated...
> Regards
> Dave Sharpe, TCBOR
> Chesterfield, VA. USA
>
>
>
>