[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Why do bad things happen to good people, (another flop)
Heres my problem, i just wound a new primary, its a
flat spiral, with a 11in inside diameter, #8ground
wire. Fed with a .01uf cap, and a 10kv 133ma supply.
My secondayr is 20in high and has a diameter of 4.5in.
I can only tune it with no topload, and the discharge
is pathetic, no more than 7in I was able to get
doulbe that in corona discharge with #12 wire wraped
around a laundry detergent bucket. What gives? Do i
need to add more turns to the inside of the primary to
close in the gap?
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!