[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PFC's gooooood...
If you are using a static gap the charts at:
will also tell you the values. When in doubt, go lower not higher in
value. They values are not critcal or anything...
At 08:22 AM 10/6/2000 -0400, you wrote:
>How do I calculate the ballpark PFC value I need? The only thing I can
>think of is to calculate the inductance of the NST primary and choose a
>capacitance that will be resonant at 60Hz. Is that right?
- PFC's gooooood...
- From: "John Morawa" <morawaj-at-interaccess-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)