I recently made my secondary coil (6" x 3') and coated it with several
layers of polyurethane. I made sure that no bumps formed when applying the
coats. I started coating pretty late and had to store it for the night in
my garage. I stored it horizontally. When I woke up, the still wet
polyurethane had gathered on the bottom of the secondary coil forming a
line of unsightly bumps across the length. I have some ideas of how I might
fix this such as using sandpaper or steel wool, but thought I would ask
first. What should I do?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla