Re: [TCML] Good salutations!

[Jake Woods <jcbwds9@xxxxxxxxx>]

I am from the west central part of Wisconsin, USA


On Sat, Jan 12, 2013 at 10:56 AM, BrianB <brianb@xxxxxxxxxx> wrote:

> Jake,
>
> Welcome to the list. You might want to let us know what part of the world
> you are in as this is an international forum and there may be others in
> your local area.
>
> I'll let others answer the DRSSTC questions.
>
> Regards,
> BrianB
>
>
> On Jan 11, 2013, at 6:23 PM, Jake Woods <jcbwds9@xxxxxxxxx> wrote:
>
> > Hello my name is Jake and I just became part of an electronics club at my
> > school. I've taken things apart and have an 'ok' background in
> electronics.
> > I've been looking around Steve's website along with Eric Goodchilds site
> > and I've decided to make a DRSSTC, I have ordered parts for Steve's UD
> 2.1
> > rev b board and i will soon start to make it. I ran into a problem and i
> > would love your guys' help/direction in calculating the specs that the
> coil
> > should be. At first I would like to use a half bridge of kd221k05's but
> > then make a very decent size coil with a possible full bridge
> > of fz800r12kl4 IGBT modules. Any help would be greatly appreciated thank
> > you guys!
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla