Re: [TCML] Good salutations!

[BrianB <brianb@xxxxxxxxxx>]

Jake,

Welcome to the list. You might want to let us know what part of the world you are in as this is an international forum and there may be others in your local area.

I'll let others answer the DRSSTC questions.

Regards,
BrianB


On Jan 11, 2013, at 6:23 PM, Jake Woods <jcbwds9@xxxxxxxxx> wrote:

> Hello my name is Jake and I just became part of an electronics club at my
> school. I've taken things apart and have an 'ok' background in electronics.
> I've been looking around Steve's website along with Eric Goodchilds site
> and I've decided to make a DRSSTC, I have ordered parts for Steve's UD 2.1
> rev b board and i will soon start to make it. I ran into a problem and i
> would love your guys' help/direction in calculating the specs that the coil
> should be. At first I would like to use a half bridge of kd221k05's but
> then make a very decent size coil with a possible full bridge
> of fz800r12kl4 IGBT modules. Any help would be greatly appreciated thank
> you guys!
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla