Re: [TCML] Secondary Coil Form

[Neon Tesla <neontesla@xxxxxxxxx>]

grey pipe is almost always ok, its usually for electrical applications,
and highly dielectric but ABS is not ok, use a pvc toilet flange,
its a bit odd ball but its dielectric and holds 4" pipe

On Tue, Sep 11, 2012 at 10:08 PM, Christian Hill <monolegal@xxxxxxxxx>wrote:

>  I have been warned to stay away from a black coil form due to it
> possibly containing carbon. What are the ramifications of using a black
> coil form? I have a 4" inner diameter piece of schedule 40 PVC I plan on
> using, but it's grey. Will the grey color cause any problems? Also, am I
> able to use a black closet flange to support my coil? It will fit just
> fine, it's the color I'm worried about. It says it is made of ABS plastic:
> Link<
> http://www.homedepot.com/h_d1/N-5yc1v/R-202313196/h_d2/ProductDisplay?catalogId=10053&langId=-1#.UFAX9I1lSYk
> >.
> Thank you very much.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>



-- 
*Don't lower your expectations, raise the voltage !*
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla