[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Calculating transformer output at lower voltages
On 6/8/12 9:45 AM, Gary Lau wrote:
I must disagree with your post. The advice is often given to determine an
NST's secondary voltage by feeding 120VAC to the secondary and measuring
the resulting Vprimary, this makes sense. However, having tried this, it
doesn't work. There's some very non-linear stuff going on with NST's, even
well below saturation. There was a thread on this topic several years ago,
I don't recall the resolution.
I haven't encountered this.. I've measured a variety of high leakage
inductance transformers.. although only one NST.
Tesla mailing list