[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Calculating transformer output at lower voltages

----- Original Message ----- From: "Jim Lux" <jimlux@xxxxxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, June 07, 2012 10:38 AM
Subject: Re: [TCML] Calculating transformer output at lower voltages

On 6/7/12 6:29 AM, mrapol@xxxxxxxxxxxx wrote:
I know the usual formula Vs/Vp = Ns/Np for calculating transformer
voltages, but I have a problem in that I am dealing with a sealed NST
and don't know the number of secondary or primary turns. What I am
trying to do is calculate the output of a 12kV NST when it's getting
less than 110 volts input. For example, if I feed the NST 30 volts AC,
what does it put out? Is there any way to figure this out without a high
voltage meter (which I don't have) and without knowing the number of
primary or secondary turns?

with no load, and with the voltage LESS than the nameplate input voltage, it scales linearly (the turns ratio isn't changing, after all)

12kV out for 120V in
3kV out for 30V in

Thanks! I wondered if it were a straight ratio, but that seemed too simple & obvious--just goes to show sometimes the answer *is* simple and obvious.

Tesla mailing list