[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] connecting tubes to make primary

To: <tesla@xxxxxxxxxx>
Subject: [TCML] connecting tubes to make primary
From: James Hutton <b-u-r-t-o-n-boy@xxxxxxxxxxx>
Date: Mon, 2 May 2011 14:14:56 -0500
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Importance: Normal
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Hello. I have two packages of 25ft flexible 1/4 inch copper tubing.
Is it wise to connect them together with aluminum tape to make the 50 feet of tubing that I need for my primary?
Are connections ok to have in a primary coil? Or should the wire be constant.
Thanks!
 		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] connecting tubes to make primary
  - From: Drake Schutt
- Re: [TCML] connecting tubes to make primary
  - From: Joe Mastroianni
- Re: [TCML] connecting tubes to make primary
  - From: chris elfert
- Re: [TCML] connecting tubes to make primary
  - From: David Rieben
- Re: [TCML] connecting tubes to make primary
  - From: Gary Lau

Prev by Date: Re: [TCML] Secondary Repair Question
Next by Date: Re: [TCML] Secondary Repair Question
Previous by thread: Re: [TCML] Secondary Repair Question
Next by thread: Re: [TCML] connecting tubes to make primary
Index(es):
- Date
- Thread