Re: [TCML] static gap singing coil hybrid.

[jimlux <jimlux@xxxxxxxxxxxxx>]

On 1/26/11 10:46 PM, Tesla wrote:
> Team
>
> I've had great success with MOT's and DC design also using more MOT's in
> the charging inductor, hate to go on but this was very low cost and big
> power coiling just using MOT's as you are thinking about
>
> My main supply is 6 MOT's, 3 MOT's centre ground per side) for a little
> over 12kvac (No shunts)
> Rectifier FW bridge with lots of 1n5403's
> PI DC filter C,L,C (The L is 4 gapped MOT's by 0.3mm) two in series of 2
> in parallel
> Ring up L same as DC filter
> 300bps SRSG, 90nF Cp, really big toroid system (12" flexiduct)
> Goes amazing, well over 3m at about 10kVA
> Very smooth operation

have you measured the L of your inductors?   Did you just use the 
existing secondary, and added a gap?  (& how did you do the gapping? 
Vise and hacksaw or something)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla